Adhesive bonding has many applications in the automotive industry. The single-lapped bonded joint is the most typically used among various bonding types. This paper presents experimental research for determining the strain field of the single-lapped joint under tensile loading. The materials for the joint are epoxy-based structural adhesive and low-carbon electrolytic zinc steel plate. In the study, a DIC (digital image correlation) system was adopted to measure the strain distribution of the bonded joint during a tensile test. The bonded steel coupons in the tensile test were prepared according to the ASTM standard. During the measurement, images of the coupon joint were taken before and after the deformation process. Then the DIC system measured the strain of bonded joint by comparing two consecutive images. The measured data from the DIC was compared to data taken simultaneously from a traditional extensometer. The comparison showed that the DIC data is accurate and DIC measurement is reliable for obtaining full-range strain of bonded steels. It gives the true strain at each point while the traditional method can only give average strain. The strain measurement results showed the non-uniform deformation of the joint in the tensile test. Coupon strain concentrates near the upper and lower lap area extremities while lower strain is observed in the lap area. The adhesive corner points possess the highest strain among the whole adhesive layer.
Whole Field Bonded Steel Tensile Test Using Digital Image Correlation System
Sae Technical Papers
SAE 2010 World Congress & Exhibition ; 2010
2010-04-12
Conference paper
English
Tensile deformation and fracture of press hardened boron steel using digital image correlation
Automotive engineering | 2007
|Tensile Deformation and Fracture of Press Hardened Boron Steel using Digital Image Correlation
British Library Conference Proceedings | 2007
|Tensile Deformation and Fracture of TRIP590 Steel from Digital Image Correlation
SAE Technical Papers | 2010
|Tensile Deformation and Fracture of Press Hardened Boron Steel using Digital Image Correlation
SAE Technical Papers | 2007
|SAE Technical Papers | 2016
|