Abstract A wind tunnel experiment for the validation of gust response computations has been performed. The model consists of an active two-dimensional rigid front wing acting as a gust generator and forcing an elastic back-swept rear wing. Results of numerical simulations with gust generation are presented. For the setup of the experiment, a simulation environment was established to identify the effect of different installation positions by parameter variation and to point out the efficiency of gust generation in the wind tunnel. The aerodynamic forces are computed by a subsonic Doublet-Lattice method (DLM) which provides considerable computational efficiency and flexibility of the numerical approach. DLM is used as a standard unsteady aerodynamic tool for gust problems and enables comparisons with CFD results. A large number of numerical results in frequency and time domain are used to obtain the forced motion of the elastic back-swept wing located downstream of the gust generator and to simulate the aerodynamic interaction in the wind tunnel. This enables a survey of gust loads on the back-swept wing in comparison to gust and turbulence loads calculated according to airworthiness standards. Furthermore, the numerical results are compared to the experimental results measured in the Transonic Wind tunnel Göttingen of the German-Dutch Wind Tunnels.
Analysis of forced response in a wind tunnel based on Doublet-Lattice method
CEAS Aeronautical Journal ; 2 , 1-4
2011
Article (Journal)
English
Analysis of forced response in a wind tunnel based on Doublet-Lattice method
Springer Verlag | 2011
|Industry Standard Doublet Lattice Implementation
Springer Verlag | 2024
|Robustness of the subsonic doublet lattice method
Online Contents | 2003
|