In this paper, we present the design and development of a portable, hand-operated composite compliant mechanism for estimating the failure-load of cm-sized stiff objects whose stiffness is of the order of 10 s of kN/m. The motivation for the design comes from the need to estimate the failure-load of mesoscale cemented sand specimens in situ, which is not possible with traditional devices used for large specimens or very small specimens. The composite compliant device, developed in this work, consists of two compliant mechanisms: a force-amplifying compliant mechanism (FaCM) to amplify sufficiently the force exerted by hand in order to break the specimen and a displacement-amplifying compliant mechanism (DaCM) to enable measurement of the force using a proximity sensor. The two mechanisms are designed using the selection-maps technique to amplify the force up to 100 N by about a factor of 3 and measure the force with a resolution of 15 mN. The composite device, made using a FaCM, a DaCM, and a Hall effect-based proximity sensor, was tested on mesoscale cemented sand specimens that were 10 mm in diameter and 20 mm in length. The results are compared with those of a large commercial instrument. Through the experiments, it was observed that the failure-load of the cemented sand specimens varied from 0.95 N to 24.33 N, depending on the percentage of cementation and curing period. The estimation of the failure-load using the compliant device was found to be within 1.7% of the measurements obtained using the commercial instrument and thus validating the design. The details of the design, prototyping, specimen preparation, testing, and the results comprise the paper.
Design of a Portable Compliant Device for Estimating the Failure-Load of Mesoscale Cemented Sand Specimens
Journal of mechanical design ; 137 , 6
2015
Article (Journal)
English
BKL: | 50.15 Konstruktionslehre / 52.20 Antriebstechnik, Getriebelehre / 52.15 Maschinenelemente, Maschinenbaugruppen | |
Local classification TIB: | 770/5315/5330 |
Lateral Load Behavior of Cast-in-Drilled-Hole Piles in Weakly Cemented Sand
Transportation Research Record | 2004
|Prediction of fracture behavior of cemented sand
Springer Verlag | 2004
|Development of Cemented Sand Module for Electric Cone Penetrometer
Transportation Research Record | 1999
|Estimating Optimized Stress Bounds in Early Stage Design of Compliant Mechanisms
Online Contents | 2017
|A flexible, MATE compliant portable test set
Tema Archive | 1990
|