During the summer of 2016, a series of drop tests were conducted on two passive earth entry vehicle (EEV) test articles at the Utah Test and Training Range (UTTR). The tests were conducted to evaluate the structural integrity of a realistic EEV vehicle under anticipated landing loads. The test vehicles were lifted to an altitude of approximately 400m via a helicopter and released via release hook into a predesignated 61 m landing zone. Onboard accelerometers were capable of measuring vehicle free flight and impact loads. High-speed cameras on the ground tracked the free-falling vehicles and data was used to calculate critical impact parameters during the final seconds of flight. Additional sets of high definition and ultra-high definition cameras were able to supplement the high-speed data by capturing the release and free flight of the test articles. Three tests were successfully completed and showed that the passive vehicle design was able to withstand the impact loads from nominal and off-nominal impacts at landing velocities of approximately 29 m/s. Two out of three test resulted in off-nominal impacts due to a combination of high winds at altitude and the method used to suspend the vehicle from the helicopter. Both the video and acceleration data captured is examined and discussed. Finally, recommendations for improved release and instrumentation methods are presented.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Full-Scale Passive Earth Entry Vehicle Landing Tests: Methods and Measurements


    Contributors:

    Publication date :

    2018-01-01


    Type of media :

    Report


    Type of material :

    No indication


    Language :

    English





    Passive earth entry vehicle landing test

    Kellas, Sotiris | IEEE | 2017



    Passive Earth Entry Vehicle Landing Test

    Kellas, Sotiris | NTRS | 2017


    Full scale drag tests of landing lamps

    Dearborn, Clinton H. | SLUB | 1934