Detailed opening loads data is presented for 18 tests of Disk-Gap-Band (DGB) parachutes of varying geometry with nominal diameters ranging from 43.2 to 50.1 ft. All of the test parachutes were deployed from a mortar. Six of these tests were conducted via drop testing with drop test vehicles weighing approximately 3,000 or 8,000 lb. Twelve tests were conducted in the National Full-Scale Aerodynamics Complex 80- by 120-foot wind tunnel at the NASA Ames Research Center. The purpose of these tests was to structurally qualify the parachute for the Mars Exploration Rover mission. A key requirement of all tests was that peak parachute load had to be reached at full inflation to more closely simulate the load profile encountered during operation at Mars. Peak loads measured during the tests were in the range from 12,889 to 30,027 lb. Of the two test methods, the wind tunnel tests yielded more accurate and repeatable data. Application of an apparent mass model to the opening loads data yielded insights into the nature of these loads. Although the apparent mass model could reconstruct specific tests with reasonable accuracy, the use of this model for predictive analyses was not accurate enough to set test conditions for either the drop or wind tunnel tests. A simpler empirical model was found to be suitable for predicting opening loads for the wind tunnel tests to a satisfactory level of accuracy. However, this simple empirical model is not applicable to the drop tests.
Opening Loads Analyses for Various Disk-Gap-Band Parachutes
17th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar ; 2003 ; Monterey, CA, United States
2003-01-01
Conference paper
No indication
English
Wind Tunnel Testing of Various Disk-Gap-Band Parachutes
AIAA | 2003
|Wind Tunnel Testing of Various Disk-Gap-Band Parachutes
NTRS | 2003
|Engineering Index Backfile | 1919
|Reefing Line Loads for Ares Parachutes
AIAA | 2011
|