An undistorted-scale hydraulic model study was conducted. Initially, two-dimensional (2-D) flume tests were employed to determine the wave-attenuating properties of four floating breakwater cross sections. Based on results of the 2-D tests and relative costs of the structures, the best plan was selected for three-dimensional (3-D) testing. The 3-D tests investigated the combined effects of angular wave attack, structure alignment, wave transmission, and wave diffraction around the exposed end of the breakwater system. The 2-D tests showed the transmission coefficient (Ct) to be strongly dependent on relative structure width (W/L) and weakly dependent on wave steepness (H/L) . Results of the 3-D tests showed that maximum wave-height attenuation was achieved when incident wave crests were at a 15-degree angle relative to the center line of the breakwater. Also, 3-D test data showed that a large decrease in the water depth (from 25 ft to 10 ft) only produced a slight decrease in transmitted wave heights.
Floating Breakwater Wave-Attenuation Tests for East Bay Marina, Olympia Harbor, Washington: Hydraulic Model Investigation
Technical Report ; HL-79-13
1979
7430020
Report
Electronic Resource
English
HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1971
|HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1981
|Floating Breakwater Field Assessment Program, Friday Harbor, Washington
HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1976
|HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1991
|Reef Breakwater Wave-Attenuation and Stability Tests, Burns Waterway Harbor, Indiana
HENRY – Federal Waterways Engineering and Research Institute (BAW) | 1995
|