Experimental testing of a number of novel additively manufactured monopropellant microthrusters was conducted under atmospheric conditions using 87.5% concentration hydrogen peroxide. The aim of this work was to select a specific catalyst bed geometry for the thruster system and to investigate more general methodologies for monopropellant packed catalyst bed optimization. Characteristic velocity efficiencies approaching 0.98 were demonstrated, and performance improved for smaller beds with low aspect ratios; although, these beds flooded at lower propellant flow rates. The onset of bed flooding was used to identify physical limits of propellant flow rate supported by the catalyst. The particular propellant–catalyst pairing limit was defined by a Damköhler number of 56, independent of the bed geometry, with thermal performance peaking for the high flow rates just before flooding occurred. It is suggested that this method is extensible to other monopropellant systems, although with further work required to confirm it is a more general effect beyond thrusters using hydrogen peroxide.


    Access

    Check access

    Check availability in my library

    Order at Subito €


    Export, share and cite



    Title :

    Methodology for Geometric Optimization and Sizing for Subnewton Monopropellant Catalyst Beds


    Contributors:

    Published in:

    Publication date :

    2021-06-22


    Size :

    12 pages




    Type of media :

    Article (Journal)


    Type of material :

    Electronic Resource


    Language :

    English






    Tools for monopropellant catalyst development

    Christofferson, Stacy / Wucherer, Edward / Zube, Dieter | AIAA | 2001


    Endurance Tests on Different Catalytic Beds for H2O2 Monopropellant Thrusters

    Pasini, Angelo / Torre, Lucio / Romeo, Luca et al. | AIAA | 2009


    Nondeterministic Analysis of Monopropellant Catalyst Bed Model

    Kerr, Daniel H. / Karagozian, Ann R. / Bilyeu, David et al. | AIAA | 2020