This study investigated the heat transfer of impinging jet arrays fed by a quadrate pipe on a ribbed surface of a high-pressure turbine case. Three models were experimentally analyzed: a row of vertical jets on a flat surface, a row of 45° jets on a ribbed surface, and a row of 45° jets combined with a row of vertical jets on the ribbed surface. Tests were conducted by the jet Reynolds number (2000–20,000), jet-to-plate spacing (, where is the jet diameter), and jet-to-jet spacing (). Results indicate that the ribbed surface greatly enhances the local Nusselt number around the impinging stagnation region. A confined channel is formed by the ribbed surface and quadrate pipe, resulting in an asymmetrical Nusselt number distribution. The spanwise-averaged Nusselt number for the combined model is greater than that for a single row of 45° jets. Results also show that the spanwise-averaged Nusselt number increases with decreasing jet-to-jet spacing, but is little affected by the jet-to-plate spacing, which attains the highest value at a jet-to-plate spacing of . The total average Nusselt number over the entire ribbed surface increases considerably (33%) at Reynolds numbers greater than 5000 compared with conventional configurations involving flat surfaces.
Heat Transfer of Impinging Jet Arrays on a Ribbed Surface
Journal of Thermophysics and Heat Transfer ; 32 , 3 ; 669-679
2018-01-23
11 pages
Article (Journal)
Electronic Resource
English
Heat Transfer of Impinging Jet and Ribbed-Duct Flows with System Reciprocation
Online Contents | 1999
|Surface heat transfer from supersonic impinging jets
AIAA | 1994
|Impinging Sweeping Jet Heat Transfer
AIAA | 2017
|Effect of Impinging Jet Excitation on Curved Surface Heat Transfer
Online Contents | 1994
|