1–20 von 6,091 Ergebnissen
|

    1D Modeling of Alternative Fuels Spray in a Compression Ignition Engine Using Injection Rate Shaping Strategy

    Perozziello, Carmela / Mancaruso, Ezio / Sequino, Luigi | SAE Technical Papers | 2019
    strategies has been set up for the Injection Rate Shaping. Experimental data collected in an optical single-cylinder compression ignition research ...

    2D/3D Painted TPO Fascia Testing to Mimic Real World Friction Induced Damage by Cohesive and Delamination Failures

    Ramamurthy, A. C. / Mihora, Dennis J. / Venditto, Virgil A. | SAE Technical Papers | 1998
    forces exceeding 5000. N. 2D tests provide the cost effective approach to materials research by isolating the failure mechanics in the upper 250 ...
    Schlagwörter: Research and development

    3D CFD Analyses of Intake Duct Geometry Impact on Tumble Motion and Turbulence Production in SI Engines

    Iorio, Agostino / Romagnuolo, Luca / Maresca, Luigi et al. | SAE Technical Papers | 2017
    In recent years, engine manufacturers have been continuously involved in the research of proper technical solutions to meet more and more ...

    3DCFD-Modeling of a Hydrogen Combustion-Process with Regard to Simulation Stability and Emissions

    Dafis, Aristidis / Rottengruber, Hermann / Jochmann, Paul | SAE Technical Papers | 2023
    In the context of the energy transition, CO2-neutral solutions are of enormous importance for all sectors, but especially for the mobility ...
    Schlagwörter: Research and development

    3D Computational Methodology for Bleed Air Ice Protection System Parametric Analysis

    Silva, Daniel / Domingos, Rodrigo | SAE Technical Papers | 2015
    shape computation. The icing tunnel data used in the validation of the proposed computer model were obtained at the NASA Icing Research Tunnel ...

    3-Dimensional Simulation of Vehicle Response to Tire Blow-outs

    Day, Terry D. / Grimes, Wesley D. / Blythe, William | SAE Technical Papers | 1998
    model by direct comparison with experiments conducted at the Transportation Research Center (TRC), in East Liberty, Ohio. The paper also ...

    3-D Modeling of Diesel Engine Intake Flow, Combustion and Emissions

    Rutland, C.J. / Reitz, Rolf D. | SAE Technical Papers | 1991
    research efforts towards improving the performance of diesel engines. The objective of the present program is to develop a comprehensive analytical ...

    3D Modelling and Photographic Investigation of Combustion in Hydra DI Diesel Engine

    Winterbone, D. E. / Moses, E. / Rao, K. K. | SAE Technical Papers | 1996
    High speed photographs of spray and combustion, obtained from a Hydra direct injection research diesel engine are compared with the ...
    Schlagwörter: Research and development

    3D Simulations And Experimental Validation of High EGR - PHCCI Combustion

    de Risi, A. / Laforgia, D. / Zurlo, S. et al. | SAE Technical Papers | 2007
    , obtained by the application of EGR up to 60% without using detailed kinetic models. In particular, the laminar and turbulent time characteristic ...

    4WS Technology and the Prospects for Improvement of Vehicle Dynamics

    Kuroki, Junsuke / Irie, Namio | SAE Technical Papers | 1990
    FOUR-WHEEL STEERING (4WS) is beginning to find widespread use as a new approach to improving vehicle dynamics, especially in the medium and ...
    Schlagwörter: Research and development

    6DOF Metrology-integrated Robot Control

    Kihlman, Henrik / Loser, Raimund | SAE Technical Papers | 2003
    operations and for dynamic force compensation. To detect and compensate deflection in industrial robots during a process, the robot uses a metrology ...
    Schlagwörter: Research and development

    42 Volt System

    Lu, Steven | SAE Technical Papers | 2001
    system as standard. In the U.S., that number (42 volts) was selected by an industry-wide research consortium led by the Massachusetts Institute ...

    135 Days in Isolation and Confinement: The Hubes Simulation

    Bichi, Alessandro F. / Vaernes, Ragnar J. | SAE Technical Papers | 1995
    by integration of 31 experiments from more than 80 research proposals from Principal Investigators from Europe, USA and Russia, in domains of ...
    Schlagwörter: Research and development

    980 XK: A Critical Automotive Application for HSLA Steel

    Jurkowski, John J. / Keller, Robert N. | SAE Technical Papers | 1977
    and have been successfully incorporated in production operations. ...

    1970s Development of 21st Century Mobile Dispersed Power

    Eltinge, Lamont | SAE Technical Papers | 1973
    supplies in the United States and will do so for the world before 2000; this portends major changes and cost increases.The twenty-first century ...
    Schlagwörter: Research and development

    1971 Cars and the “New” Gasolines

    Rogers, J. D. / Poskitt, R. W. / Morris, W. E. | SAE Technical Papers | 1971
    in the same cars to obtain further insight into the effects of research octane number, motor octane number, and lead content on road octane ...

    1978 U. S. Automotive Service Market: How Large is Large?

    DeWeese, Lemuel Carroll | SAE Technical Papers | 1981
    The size of the 1978 automotive service market is the total dollars spent on car and truck repair and maintenance in 1978. The 1978 ...

    1990 Clean Air Act Impacts on Finishing Technology and Operations in the Medium and Heavy Duty Truck & Bus Industry

    Schultz, Karl R. | SAE Technical Papers | 1995
    The Clean Air Act Amendments of 1990 have brought about wholesale changes in the mandated requirements for the EPA and states to bring ...

    4994 Tractor Hydraulic System

    Palmersheim, G.M. | SAE Technical Papers | 1984
    J I Case Company has produced four-wheel-drive agricultural tractors since 1964. In 1984 however, the flagship of the Case fleet changed ...

    9000T Series John Deere Track Tractors

    Cote, Brad / Niebuhr, Dan / Kreis, Ed et al. | SAE Technical Papers | 2000
    425-HP 9400T tractors were designed with input from customers to meet customers' needs. Through customer input, on-farm research, and common ...
    Schlagwörter: Research and development