1–50 von 90 Ergebnissen
|

    Studies on Edge Strain Hardening Produced by Trimming Operations

    Chiriac, Constantin / Shi, Ming F. | SAE Technical Papers | 2013

    Key Steps Toward Development of Humanoid Robots

    Xie, Ming | Springer Verlag | 2022
    Beteiligte: Silva, Manuel F.

    Strain Hardening and Forming Limits of Automotive Steels

    Shi, Ming F. | SAE Technical Papers | 1995

    Analysis of Left-Turn Saturation Flow Rates and Capacity at Signalized Intersections

    Wang, Ming-Heng / Benekohal, Rahim (Ray) F. | Transportation Research Record | 2010

      Analysis of Left-Turn Saturation Flow Rates and Capacity at Signalized Intersections

      Wang, Ming-Heng | Online Contents | 2010
      Beteiligte: Benekohal, Rahim F

    The Prestrain Effect on the Sheared Edge Flangeability of Dual Phase 780 Steels

    Chiriac, Constantin / Shi, Ming F. / Link, Todd M. | SAE Technical Papers | 2012

    Arrival-Based Uniform Delay Model for Exclusive Protected-Permitted Left-Turn Lane at Signalized Intersections

    Wang, Ming-Heng / Benekohal, Rahim F. | Transportation Research Record | 2007

    Application of 6-Dof Robot Motion Planning in Fabrication

    Freier Zugriff
    Wu, Hao / Lu, Ming / Zhou, XinJie et al. | Springer Verlag | 2021
    Beteiligte: Yuan, Philip F.

    Experimental and Numerical Studies of Crash Trigger Sensitivity in Frontal Impact

    Chen, Guofei / Shi, Ming F. / Tyan, Tau et al. | SAE Technical Papers | 2005

    Mass Efficient Cross-Sections Using Dual Phase Steels For Axial and Bending Crushes

    Chen, Guofei / Shi, Ming F. / Tyan, Tau | SAE Technical Papers | 2007

    Blocked Time of Permitted Left-Turn Lane Group with Two Opposing Lanes for Two Arrival Types

    Wang, Ming-Heng / Benekohal, Rahim F. | Transportation Research Record | 2006

      Blocked Time of Permitted Left-Turn Lane Group with Two Opposing Lanes for Two Arrival Types

      Wang, Ming-Heng | Online Contents | 2006
      Beteiligte: Benekohal, Rahim F.

    Numerical Investigation of Effects of Frame Trigger Hole Location on Crash Behavior

    Chen, Guofei / Shi, Ming F. / Tyan, Tau et al. | SAE Technical Papers | 2005

    Development of Dynamic Dent Resistance Testing Procedures

    Shih, Hua-Chu / Shi, Ming F. | SAE Technical Papers | 2003

    Verfahren zum Testen der Motordrehmomentintegrität bei einem Hybrid-Elektrofahrzeug

    Freier Zugriff
    HSIEH TUNG-MING / HUBBARD GREGORY A / SAH JY-JEN F | Europäisches Patentamt | 2019

    Strain Rate Sensitivity of Automotive Steels

    Meuleman, David J. / Shi, Ming F. | SAE Technical Papers | 1992

    Comparison and evaluation of railway subgrade quality detection methods

    Nie, Ru-song / Leng, Wu-ming / Yang, Qi et al. | SAGE Publications | 2018

    Dynamic Dent Resistance Performance of Steels and Aluminum

    Shi, Ming F. / Zurdosky, Stephen J. | SAE Technical Papers | 1993

    Study of Biodiesel Combustion in a Constant Volume Chamber with Different Ambient Temperature and Oxygen Concentration

    Lee, Chia-fon F. / Liu, Haifeng / Huo, Ming et al. | SAE Technical Papers | 2011

    Automated Extraction of Microtubules and Their Plus-Ends

    Jiang, Ming / Ji, Qiang / McEwen, Bruce F. | IEEE | 2005

    Dynamic dent resistance performance of steels and aluminum

    Ming F. Shi / Zurdosky, S.J. | Tema Archiv | 1993

    An Evaluation of Interface Friction in Different Forming Models for Coated Steel Sheets

    Meuleman, David J. / Shi, Ming F. | SAE Technical Papers | 1992

    Robust Non-Coherent Beamforming for FDD Downlink Massive MIMO

    Rottenberg, Francois / Lee, Ming-Chun / Choi, Thomas et al. | IEEE | 2020

    Development of Shear Fracture Criterion for Dual-Phase Steel Stamping

    Zeng, Danielle / Shih, Hua-Chu / Shi, Ming F. et al. | SAE Technical Papers | 2009

    A Comparison of the Response of HSLA and Dual Phase Sheet Steel in Dynamic Crush

    Stibich, Anne M. / Fekete, James R. / Shi, Ming F. | SAE Technical Papers | 2001

    An Experimental Study of Springback for Dual Phase Steel and Conventional High Strength Steel

    Konieczny, Aleksy A. / Du, Changqing / Shi, Ming F. | SAE Technical Papers | 2001

    Hybrid PN-ZP-DMT Scheme for Spectrum-Efficient Optical Communications and Its Application to SI-POF

    Linning, P. / Helard, M. / Haese, S. et al. | British Library Online Contents | 2014

    Dynamische Simulation hydrostatischer Getriebe

    Predki, W. / Jarchow, F. / Liu, Ming et al. | Tema Archiv | 2005

    Formability Issues in the Application of Tailor Welded Blank Sheets

    Pickett, Ken M. / Bhatt, Kumar K. / Shi, Ming F. | SAE Technical Papers | 1993

    Reducing fuel consumption in platooning systems through reinforcement learning

    Freier Zugriff
    Cunha, Rafael F. / Gongalves, Tiago R. / Varma, Vineeth S. et al. | BASE | 2022

    Beschleunigungsbegrenzung für ein Fahrzeug

    Freier Zugriff
    SAH JY-JEN F / STEINMETZ TODD M / HSIEH TUNG-MING et al. | Europäisches Patentamt | 2016

    Comparative study of frequency domain filtered-x LMS algorithms applied to vehicle powertrain noise control

    Duan, Jie | Online Contents | 2009
    Beteiligte: Lee, Ming-Ran , Vanhaaften, F. , Cheng, Ming-Te

    Sensitivity of Material Constitutive Parameters in Sheet Metal Forming Simulations

    Prince, Douglas G. / Shi, Ming F. / Song, Wenhui | SAE Technical Papers | 1998

    Speed Photo–Radar Enforcement and Its Effects on Speed in Work Zones

    Benekohal, Rahim F. / Wang, Ming-Heng / Chitturi, Madhav V. et al. | Transportation Research Record | 2009

      Speed Photo-Radar Enforcement and Its Effects on Speed in Work Zones

      Benekohal, Rahim F. | Online Contents | 2009
      Beteiligte: Wang, Ming-Heng

    Downstream Effects of Speed Photo–Radar Enforcement and Other Speed Reduction Treatments on Work Zones

    Medina, Juan C. / Benekohal, Rahim F. / Hajbabaie, Ali et al. | Transportation Research Record | 2009

      Downstream Effects of Speed Photo-Radar Enforcement and Other Speed Reduction Treatments on Work Zones

      Medina, Juan C. | Online Contents | 2009
      Beteiligte: Benekohal, Rahim F. , Wang, Ming-Heng

    Sustained and Halo Effects of Various Speed Reduction Treatments in Highway Work Zones

    Hajbabaie, Ali / Medina, Juan C. / Wang, Ming-Heng et al. | Transportation Research Record | 2011

      Sustained and Halo Effects of Various Speed Reduction Treatments in Highway Work Zones

      Hajbabaie, Ali | Online Contents | 2011
      Beteiligte: Wang, Ming-Heng , Benekohal, Rahim F

    Transient Simulation of DGI Engine Injector with Needle Movement

    Alajbegovic, Ales / Meister, Gerhard F. / Yoo, Joon-Ho et al. | SAE Technical Papers | 2002

    Automated Speed Photo Enforcement Effects on Speeds in Work Zones

    Benekohal, Rahim F. / Chitturi, Madhav V. / Hajbabaie, Ali et al. | Transportation Research Record | 2008

      Automated Speed Photo Enforcement Effects on Speeds in Work Zones

      Benekohal, Rahim F. | Online Contents | 2008
      Beteiligte: Wang, Ming-Heng

    FUEL CELL STACK DIAGNOSTICS USING CROWDSOURCING FOR CONNECTED FUEL CELL VEHICLE

    Freier Zugriff
    CHENG MING / JOHRI RAJIT / SANDERSON JR WILLIAM F et al. | Europäisches Patentamt | 2023

    Effect of canard oscillations on an X-31A-like model in pitching maneuver

    Hebbar, Sheshagiri K. / Platzer, Max F. / Liu, Da-Ming | AIAA | 1995

    Optimization of Daylight and Thermal Performance of Building Façade: A Case Study of Office Buildings in Nanjing

    Freier Zugriff
    Yan, Hainan / Zhang, Yiting / Liu, Sheng et al. | Springer Verlag | 2021
    Beteiligte: Yuan, Philip F.

    Calibration of structured-light sensor for multivisual inspection system [2350-38]

    Feng, K. / Ming, L. / SPIE | British Library Conference Proceedings | 1994
    Beteiligte: El-Hakim, S. F.

    A Failure Criterion for Stretch Bendability of Advanced High Strength Steels

    Du, Chang Q. / Zhou, Dajun / Wu, Jin et al. | SAE Technical Papers | 2006

    Prediction of Pressure Fluctuations Inside an Automotive Fuel Rail System

    Lai, Ming-Chia / Hu, Qiang / Raghupathi, Ragu et al. | SAE Technical Papers | 1999