Synonyme wurden verwendet für: Verformung
Suche ohne Synonyme: keywords:("Verformung")

1–50 von 250 Ergebnissen
|

    A numerical analysis of the contact stress distribution and physical modelling of abrasive wear in the tram wheel-frog system

    Kuminek, Tomasz / Aniolek, Krzysztof / Mlynczak, Jakub | Tema Archiv | 2015
    Schlagwörter: Deformation

    Damage characterization and numerical modeling of titanium matrix composites subjected to low-velocity impact for landing gear application

    Yokozeki, Tomohiro / Kotsuka, Naoki / Yoshida, Keisuke et al. | Tema Archiv | 2015
    Schlagwörter: plastische Deformation

    Tunnelling for the third section of the Stadtbahn line U12 in Stuttgart

    Gradnik, Richard / Kicherer, Manfred / Zwick, Markus | Tema Archiv | 2014
    Schlagwörter: Verformung

    Study on ductile crack initiation limit from notch root of pipeline girth welded joints with strength mismatch

    Motohashi, Hiroyuki / Yatabe, Hiroshi | Tema Archiv | 2014
    Schlagwörter: plastische Verformung

    A study on high-speed rolling contact between a wheel and a contaminated rail

    Zhao, Xin / Wen, Zefeng / Zhu, Minhao et al. | Tema Archiv | 2014
    Schlagwörter: plastische Deformation

    Baralt Tunnel: Absicherung gegen tektonische Aktivität

    Nogain, Mauro | Tema Archiv | 2014
    Schlagwörter: Verwerfung (Verformung)

    Ratchetting of railhead material of insulated rail joints (IRJs) with reference to endpost thickness

    Mandal, Nirmal Kumar | Tema Archiv | 2014
    Schlagwörter: plastische Deformation

    On the low cycle fatigue failure of insulated rail joints (IRJs)

    Mandal, Nirmal Kumar | Tema Archiv | 2014
    Schlagwörter: plastische Deformation

    The Research of Sliding Boot Design Based on Compliance Characteristic

    Liu, Jie / Gao, Feng / Xu, Guo Yan | Trans Tech Publications | 2013
    Schlagwörter: System Deformation

    Development of a switch rail with improved wear resistance

    Oikawa, Yuya | IuD Bahn | 2013
    Schlagwörter: Verformung

    Rail corrugation growth on small radius curves—Measurements and validation of a numerical prediction model

    Torstensson, Peter T. / Schilke, Martin | Tema Archiv | 2013
    Schlagwörter: plastische Verformung

    A Robust Finite Element Analysis of the Rail-Wheel Rolling Contact

    Aalami, Mohammad Reza / Anari, Aras / Shafighfard, Torkan et al. | Tema Archiv | 2013
    Schlagwörter: plastische Deformation , elastische Verformung

    Elastic - plastic fracture analyses for pipeline girth welds with 3D semi-elliptical surface cracks subjected to large plastic bending

    Zhang, Y.M. / Yi, D.K. / Xiao, Z.M. et al. | Tema Archiv | 2013
    Schlagwörter: plastische Verformung

    Schlüchterner Tunnel: Nachrüstung von Rettungsstollen für Tübbingtunnel unter laufendem Eisenbahnverkehr

    Städing, Axel / Schindler, Falk D. / Gunnemann, Jürgen | Tema Archiv | 2013
    Schlagwörter: Verformung

    "Val Fortore State Road 212" - Excavation of tunnels in structurally complex formations

    Cassani, Giovanna | Tema Archiv | 2013
    Schlagwörter: Verformung

    Structural behavior of solid expandable tubular undergoes radial expansion process – Analytical, numerical, and experimental approaches

    Al-Abri, Omar S. / Pervez, Tasneem | Tema Archiv | 2013
    Schlagwörter: plastische Deformation

    Welding Deformation Controlling for the Truck Rack Girder

    Li, Li Qin / Zhao, Li Bin / Liu, Xi Min | Trans Tech Publications | 2012
    Schlagwörter: Welding Deformation , Anti-Deformation Control

    Numerical analysis of the straightening process of thin plate structures by elastic FEM based on the inherent strain method

    Vega, Adan / Camano, Alexandra / Blandon, Juan et al. | Tema Archiv | 2012
    Schlagwörter: plastische Verformung

    Design of hydroforming process for an automobile subframe by FEM and experiment

    Jiang, Hao-min / Yang, Bing / Chen, Xin-Ping et al. | Tema Archiv | 2012
    Schlagwörter: Formänderung

    Finite element analysis of railway disc brake considering structural, thermal, and wear phenomena

    Olshevskiy, Alexander / Olshevskiy, Alexey / Berdnikov, Oleg et al. | Tema Archiv | 2012
    Schlagwörter: thermische Verformung

    Transient thermal tensioning for control of buckling distortion due to welding of stiffened steel panels

    Yang, Y.P. / Dull, R. / Conrardy, C. | Tema Archiv | 2012
    Schlagwörter: plastische Verformung

    Load-deflection prediction and stress verification in extreme large deformation of rubber suspensions used in rail vehicles

    Luo, R.K. / Peng, L.M. / Wu, X.P. et al. | Tema Archiv | 2012
    Schlagwörter: Verformung unter Last

    EBW of AA 6061 T651 aluminium alloy cold plates for the space guinea pig living unit cooling system

    Barbieri, G. / Moncada, M. / Sgambati, A. | Tema Archiv | 2012
    Schlagwörter: Deformation , Verwerfung (Verformung)

    Friction forces and plastic strain of plain bearings in airplanes

    Titov, V.V. | Tema Archiv | 2012
    Schlagwörter: plastische Verformung

    Geotechnical design and construction issues for Lines 1 and 6 of the Naples Underground

    Russo, Gianpiero / Viggiani, Carlo / Viggiani, G.M.B. | Tema Archiv | 2012
    Schlagwörter: Verformung

    Mechanical behavior of carbon/PEKK thermoplastic composite tube under bending load

    Derisi, B. / Hoa, Suong V. / Xu, D. et al. | Tema Archiv | 2011
    Schlagwörter: Verformung

    Anforderungsgerechte Fertigung. Dünnwandige gegossene Aluminium-Prototypen und Kleinserien im Karosseriebau

    Gundlach, Joachim / Detering, Jörg | Tema Archiv | 2011
    Schlagwörter: Verzug (Verformung)

    Case study for welding simulation in the automotive industry

    Perret, W. / Thater, R. / Alber, U. et al. | Tema Archiv | 2011
    Schlagwörter: plastische Verformung

    Joining sheet panels to thin-walled tubular profiles by tube end forming

    Alves, Luis M. / Dias, Eduardo J. / Martins, Paulo A.F. | Tema Archiv | 2011
    Schlagwörter: Verformung

    Analysis of shear droop on cut surface of high-tensile-strength steel in fine-blanking process

    Tanaka, Toru / Hagihara, Seiya / Tadano, Yuichi et al. | Tema Archiv | 2011
    Schlagwörter: Verformung

    Application of pulsed tandem gas metal arc welding for fabrication of high strength steel panels in naval surface vessels

    Sterjovski, Z. / Donato, J. / Munro, C. et al. | Tema Archiv | 2011
    Schlagwörter: Verformung

    The effect of prestrain on ductile fracture toughness of reeled pipeline steels

    Tkaczyk, Tomasz / O'Dowd, Noel P. / Nikbin, Kamran | Tema Archiv | 2011
    Schlagwörter: plastische Deformation

    Influence of technological factors on resistance to delayed fracture of butt joints of rail steel in arc welding

    Poznyakov, V.D. / Kiriakov, V.M. / Gajvoronsky, A.A. et al. | Tema Archiv | 2011
    Schlagwörter: Verformung

    Reducing work load and increasing dimensional accuracy in parts for bending of high-strength steel sheets for automobiles

    Nishino, Souichiro / Ohya, Kunio | Tema Archiv | 2011
    Schlagwörter: plastische Verformung

    Fatigue design of welded components of railway vehicles - influence of manufacturing conditions and weld quality

    Kassner, Manfred / Küppers, Martin / Bieker, Guido et al. | Tema Archiv | 2010
    Schlagwörter: Verformung

    Springback adjustment for multi-point forming of thick plates in shipbuilding

    Hwang, Se-Yun / Lee, Jang-Hyun / Yang, Yong-Sik et al. | Tema Archiv | 2010
    Schlagwörter: elastische Verformung

    Geometry and stiffness optimization for switches and crossings, and simulation of material degradation

    Nicklisch, D. / Kassa, E. / Nielsen, J. et al. | Tema Archiv | 2010
    Schlagwörter: plastische Verformung

    Development of Cu-bearing bake-hardenable steel sheets for automotive exposed panels

    Hong, Moon-Hi / Cho, Noi-Ha / Kim, Sung-Il et al. | Tema Archiv | 2010
    Schlagwörter: Verformung

    Alternative joining procedures in outfitting processes

    Fuchs, Normen / Wanner, Martin-Christoph / Henkel, Knuth-Michael | Tema Archiv | 2010
    Schlagwörter: Deformation

    The crushing characteristics of square tubes with blast-induced imperfections - Part I: Experiments

    Yuen, S. Chung Kim / Nurick, G.N. | Tema Archiv | 2009
    Schlagwörter: Verformungsart

    Deformation analysis of large aerospace components during assembly

    Saadat, Mozafar / Cretin, Lylian / Sim, Roy et al. | Tema Archiv | 2009
    Schlagwörter: Verformung

    Determination of optimum welding sequence and distortion forces in steel lattice beams

    Ozcatalbas, Yusuf / Vural, H. Ibrahim | Tema Archiv | 2009
    Schlagwörter: Verzug (Verformung)

    Application of hot press forming process to manufacture an automotive part and its finite element analysis considering phase transformation plasticity

    Lee, Myoung-Gyu / Kim, Sung-Joon / Han, Heung-Nam et al. | Tema Archiv | 2009
    Schlagwörter: plastische Verformung

    Frequency loci veering due to deformation in rotating tyres

    Lopez, I. / Doorn, R.R.J.J. van / Steen, R. van der et al. | Tema Archiv | 2009
    Schlagwörter: Verformung

    The determination of heating shapes and locations for triangle heating

    Kim, Young-Bum / Park, Jung-Seo / Shin, Jong-Gye et al. | Tema Archiv | 2009
    Schlagwörter: thermische Verformung

    Simplified mathematical formulas for the prediction of deformations in the plate bending process using an oxy-propane gas flame

    Bae, K.Y. / Yang, Y.S. / Hyun, C.M. et al. | Tema Archiv | 2009
    Schlagwörter: Verformung

    Control of longitudinal bending distortion of built-up beams by hygh-frequency induction heating

    Park, J.U. / Park, S.C. / Lee, C.H. | Tema Archiv | 2009
    Schlagwörter: plastische Verformung