101–150 von 3,025 Ergebnissen
|

    Fractional Thermal Runaway Calorimetry: A Novel Tool to Assess Battery Thermal Runaway Energy

    Kossolapov, Artyom / Colella, Francesco / Yen, May et al. | SAE Technical Papers | 2023
    The use of Lithium-ion batteries in the transportation sector has its own unique set of requirements such as high-power demands, cooling ...
    Verlag: Society of Automotive Engineers , SAE International

    Life Cycle Climate Performance of MAC Systems in Battery Electric Vehicles

    Nasuta, Dennis / Carow, James / Lippy, Michael | SAE Technical Papers | 2023
    heating and AC. Finally, a BEV may also include a chiller, acting as part of a thermal management system for the drivetrain and batteries. These ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate

    Operation of a Natural Gas Direct Injection Compression Ignition Single Cylinder Research Engine

    Singh, Ashish / Eggart, Brian / Naber, Jeffrey et al. | SAE Technical Papers | 2023
    The medium and heavy-duty powertrain industry trend is to reduce reliance on diesel fuel and is aligned with continued efforts of achieving ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Thermal Analysis of an Electric Motor in an Electric Vehicle

    Sankar, Aadithian / Umar, Abdul / JOHN, Bilu et al. | SAE Technical Papers | 2023
    , efficiency and reliability of the motor is affected.Performing the Analysis method on the Motor that is designed according to the parameters such as ...
    Verlag: Society of Automotive Engineers , SAE International

    Feedback Linearization-based Thermal Control Strategy for Electrified Vehicles

    Toriumi, Fabio / Weslati, Feisel / Bouyoucef, Kamal et al. | SAE Technical Papers | 2023
    heating governing equations and is correlated with a 1-D model of the thermal systems of the target vehicle. The controller is composed of an ...
    Verlag: Society of Automotive Engineers , SAE International

    Mechanical Design Considerations for Electric Vehicle Power Electronics

    Abu-Zama, Dawud / Suciu, Ioan / Teimor, Mehrdad et al. | SAE Technical Papers | 2023
    and the bulk capacitor. The sizing and selection of the bulk capacitor and power module depend on performance criteria and drive profiles in ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of Charging System for bZ4X

    Motohira, Akito / Tsutsumi, Daisuke | SAE Technical Papers | 2023
    charger is external to the ESU. By building separate on-board chargers for easier integration, this allowed the ESU and peripheral components to ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of a High-Pressure Fuel Injection System for Use with Propane-DME

    Wu, Simon (Haibao) / De Ojeda, William | SAE Technical Papers | 2023
    the rail. Results show a significant reduction on pumping work parasitics and of fuel heating, on the order of 40°C, at typical working ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of a Multiple Injection Strategy for Heated Gasoline Compression Ignition (HGCI)

    Zyada, Antowan / Zoldak, Philip | SAE Technical Papers | 2023
    strategy with impact on smoke and pressure rise rates. Double and Triple injection strategies were developed and utilized to maintain the indicated ...
    Verlag: Society of Automotive Engineers , SAE International

    Sustainable Air Conditioing with District Cooling System (DCS)

    Pillai, Reji Kumar / Suri, Reena / Kundu, Suddhasatta et al. | Springer Verlag | 2022
    defeated by sheer increase in the number of air conditioners. Radical approaches are required to address the cooling challenge. District Cooling ...
    Schlagwörter: Power Electronics, Electrical Machines and Networks , Measurement Science and Instrumentation , Energy Policy, Economics and Management , Circuits and Systems

    Research on Heat Dissipation Performance of Automobile Motor Based on Heat Pipe Optimization Design

    Ou, Chunguo / Yang, Chunyun / Tan, Gangfeng et al. | SAE Technical Papers | 2022
    optimization design based on a drive motor heat dissipation scheme is proposed, and the overall stability of the motor working under high temperature ...
    Verlag: Society of Automotive Engineers , SAE International

    Heat Dissipation with Heat Pipe Using Particle Swarm Optimization and Being Used for High Power LED

    Zhongliang, Pan / Ling, Chen | Springer Verlag | 2022
    increase. Therefore, in order to ensure the reliability of electronic components, heat dissipation treatment must be carried out, and heat pipe ...
    Schlagwörter: Heat dissipation method , Transportation Technology and Traffic Engineering , Control and Systems Theory

    Experimental Study of a 1 kW Thermoelectric Module Heat Exchanger for Vehicle: Cabin Cooling and Heating Application

    Lee, Daewoong / Hwang, Seungyong | Springer Verlag | 2022
    and water cooling jacket, attached on the thermoelectric modules both hot and cold side. The cooling and heating performance experiment was ...
    Schlagwörter: Cooling capacity , Heating capacity

    Study of Installation Effects on Automotive Cooling Fan Noise

    Weng, Chenyang / Knutsson, Magnus / Abom, Mats et al. | SAE Technical Papers | 2022
    main noise source on conventional vehicles, noise from other components becomes more perceivable; among these components, the cooling fan is ...
    Verlag: Society of Automotive Engineers , SAE International

    Study on Passenger Cabin under Passive Radiative Cooling Film

    Zheng, Chao / Luo, Xin / Chao, Yipeng et al. | SAE Technical Papers | 2022
    calculated and analyzed based on the heat balance equation. The influence of radiative cooling film on the temperature field of passenger cabins was ...
    Verlag: Society of Automotive Engineers , SAE International

    A Review on Vehicle Cabin Heating Solutions for Cold Ambient Conditions

    Rana, Satyendra / Suman, Saurabh / Kushwah, Yogendra Singh | SAE Technical Papers | 2022
    In electric vehicles, along with cooling and heating requirement of battery, cabin atmosphere also need to be controlled according to human ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Weather and climate , Heating, ventilation, and air conditioning systems (HVAC)

    CFD Simulation of Oil Jet Piston Cooling Applied to Pistons with Cooling Gallery

    Hopf, Anselm / Weber, Carsten / Kraemer, Frank et al. | SAE Technical Papers | 2022
    , computational fluid dynamics (CFD) simulations help to quantify the piston cooling performance and provide detailed insights into the complex ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes

    Design Optimization of Geometric Parameters of Radiator Based on Cooling Module

    Zhang, Dezheng / Ni, Jimin / Jiang, Nan | SAE Technical Papers | 2022
    performance in the cooling module environment and optimize the geometric parameters to improve the heat dissipation performance of the radiator. Based ...
    Verlag: Society of Automotive Engineers , SAE International

    Research on the Bionic Design and Performance of Engine Cooling Fan with Blade Tip Serrated

    Shangguan, Wen-Bin / Wang, Xinling / Duan, Yaolong et al. | SAE Technical Papers | 2022
    structure is designed on a different type cooling fan, and then tested in anechoic chamber, which shows that the noise performance gain a promotion ...
    Verlag: Society of Automotive Engineers , SAE International

    Vehicle-mounted battery and electric control cooling system based on liquid hydrogen vaporization cold energy utilization

    Freier Zugriff
    LU JUNLIANG / SHENG KUANG / WU ZAN et al. | Europäisches Patentamt | 2022

    The invention discloses a vehicle-mounted battery and electric control cooling system based on liquid hydrogen vaporization cold energy

     ...

    Effect of Fuel Cetane Number on the Performance of Catalyst-Heating Operation in a Medium-duty Diesel Engine

    Wu, Angela / Lopez Pintor, Dario / Cho, Seokwon et al. | SAE Technical Papers | 2022
    strategy. The two post injections are block-shifted to increasingly retarded timings, and the effects on exhaust heat and pollutant emissions are ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Combustion and combustion processes , Environmental regulations and standards

    Pressure Drop and Heat Transfer Analysis of Power Battery Liquid Cooling System

    Lu, Chihua / Xie, Miao / Pei, Shuqing et al. | SAE Technical Papers | 2022
    increase the inlet mass flow rate and improve the heat dissipation performance of the liquid cooling plate. The research shows that the optimized ...
    Verlag: Society of Automotive Engineers , SAE International

    Cabin Comfort Improvement and Heating Energy Reduction under Cold-Condition by Using Radiative Heater

    Sakamoto, Daisuke / Sasaki, Hirotaka | SAE Technical Papers | 2022
    anterior thigh and shin where a conductive heating cannot warm, was applied to vehicle. The target performance was defined based on input heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Heating, ventilation, and air conditioning systems (HVAC)

    Numerical Modelling of Coolant Filling and De-aeration in a Battery Electric Vehicle Cooling System

    Motin, Abdul / Srinivasan, Chiranth / Slike, Jody et al. | SAE Technical Papers | 2022
    Trapped air bubbles inside coolant systems have adverse effect on the cooling performance. Hence, it is imperative to ensure an effective ...
    Verlag: Society of Automotive Engineers , SAE International

    Model-Based Design of Triple-Screw Pump for Automotive Engine Cooling

    Carminati, Alessandro / Di Battista, Davide / Fatigati, Fabio et al. | SAE Technical Papers | 2022
    , engine cooling optimization, seem to have additional value thanks to their easiness to be applied on board, without invasive modification of the ...
    Verlag: Society of Automotive Engineers , SAE International

    Multiphase Flow and Thermal Analysis of Hollow-Shaft Cooling System for Motors of Electric Drive Units

    Kolesnikov, Alexy / Yashwanth, Bangalore Lingaraj / Ronning, Jeffrey J. et al. | SAE Technical Papers | 2022
    ensures sufficient heat dissipation from the motor and helps to reduce packaging size.Although both stator and rotor are cooled in a typical motor ...
    Verlag: Society of Automotive Engineers , SAE International

    Design Optimization of Engine Cooling System for Light Duty Diesel Engine for Weight and Cost Reduction Purpose

    Bhargava, Aashish / Khaire, Mahesh / Dixit, Rohan et al. | SAE Technical Papers | 2022
    : radiator, expansion tank, cooling fan, fan drive and shroud. The mounting structure for this system must be designed to withstand the loads that ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Cross-Flow Radiator Design Using CFD for FSAE Car Cooling System and Its Experimental Validation Using the GEMS Data Acquisition System

    Selvaraj, Arunsaco / Devaraj, Elangovan / Jain, Jeevesh et al. | SAE Technical Papers | 2022
    , and radiator material. The purpose of a properly designed radiator is to prevent the combustion engine from heating up above its operating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Data acquisition and handling

    Investigation of Temperature Generalization for PCM-Based Cooling Plate Used for Remotely Located Electronics

    Wu, Bo / Wang, Bin / Zhao, Liang et al. | Springer Verlag | 2022
    performance of PCM-based cooling plates utilized in remotely located electronics and could be served as a quick design tool. ...
    Schlagwörter: Cooling plate , Aerospace Technology and Astronautics

    Assessment of a Serial Cooling Concept for HTPEM Fuel Cell Systems for Aviation Applications

    Freier Zugriff
    Link, Antje / Ludowicy, Jonas / Staggat, Martin | Deutsches Zentrum für Luft- und Raumfahrt (DLR) | 2022
    temperature proton exchange membrane fuel cell systems is introduced and analysed. For a liquid cooling system, the coolant mass has a high share of ...
    Schlagwörter: serial cooling concept

    Quasi-One-Dimensional Model of Hydrocarbon-Fueled Scramjet Combustor Coupled with Regenerative Cooling

    Freier Zugriff
    Yuefei Xiong / Jiang Qin / Kunlin Cheng et al. | DOAJ | 2022
    distributions of flow parameters in the supersonic combustor and cooling channel. Differences on ignition delay time and combustion efficiency for the ...

    Evaluation of Equivalent Temperature in Vehicle Cabin by a Mesh-Free Simulation—Part 3: Evaluation of Equivalent Temperature under Transient Heating Condition

    Matsumoto, Akira / Oi, Hajime / Kondo, Ryota et al. | SAE Technical Papers | 2022
    This paper describes the equivalent temperature based on the mesh-free simulation proposed by the previous papers (Part1 and Part2) under ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: CAD, CAM, and CAE , Simulation and modeling , Heating, ventilation, and air conditioning systems (HVAC)

    Adjoint Method for the Optimisation of Conformal Cooling Channels of 3-D Printed High-Pressure Tools for Aluminium Casting

    Abo-Serie, Essam F. / Jewkes, James / Dodd, Paul et al. | SAE Technical Papers | 2022
    The emergence of additive manufacturing (AM) technology has enabled the internal cooling channel layout for high pressure aluminium die ...
    Verlag: Society of Automotive Engineers , SAE International

    Research on Clearance of Multi-Arc Combined Gerotor Pump Based on CFD

    Li, Min / Zhen, Ran / Shangguan, Wen-Bin et al. | SAE Technical Papers | 2022
    Due to the advantages of compact structure, stable operation, and low cost, the gerotor pumps are widely used in the cooling and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Modeling and Simulation Analysis of Electric Vehicle Thermal Management System Based on Distributed Parameter Method

    Kong, HaiQin / Fan, Shuang / Shangguan, Wen-Bin | SAE Technical Papers | 2022
    and the influence on the heating comfort of the cabin were studied. A control strategy for the rapid cooling of the battery pack was proposed ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    Benefits of a Dual HP and LP EGR Circuit on a Turbocharged Direct Injection Gasoline Engine

    Denton, Bradley / Chadwell, Christopher / Handa, Gaurav et al. | SAE Technical Papers | 2022
    , however, volumetric efficiency also reduces with EGR which places challenges on the boosting system. The individual benefits of high-pressure (HP ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Engine cooling systems

    Field Experimental Investigation on Human Thermal Comfort in Vehicle Cabin

    Zhao, Lanping / Xu, Xin / Yang, Zhigang | SAE Technical Papers | 2022
    A comfortable thermal environment can alleviate fatigue, reduce irritability, and improve driving safety. However, it is rather a challenge ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development , Heating, ventilation, and air conditioning systems (HVAC)

    Design and Optimization of an SUV Engine Compartment Bottom Shield Based on Kriging Interpolation and Multi-Island Genetic Algorithm

    Ni, Jimin / Liu, Qiang / Zheng, Teng et al. | SAE Technical Papers | 2022
    bottom shield, the engine compartment is modeled and analyzed by CFD using the software STAR-CCM+. It is not conducive to the heat dissipation ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling

    A Study on the Sound Transmission Loss of Split HVAC for Electric Vehicles

    Kim, Byounghoon / Kim, Hyunwoo / Chae, Ki-Sang et al. | SAE Technical Papers | 2022
    Generally, the HVAC system of a vehicle is composed of Blower unit assembly and Heater unit assembly, and is located on the driver’s side ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)

    Modeling Climate Control Loads and the Impact on Vehicle Range for Last-Mile Electric Delivery Trucks in Cold Climates

    Trujillo, Jeromy / Eagon, Matthew / Northrop, William | SAE Technical Papers | 2022
    mitigate the detrimental effects of extreme ambient temperatures on battery state of health and effective nominal capacity. However, low ambient ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Heating, ventilation, and air conditioning systems (HVAC)

    Chevrolet Bolt Electric Vehicle Model Validated with On-the-Road Data and Applied to Estimating the Benefits of a Multi-Speed Gearbox

    Emadi, Ali / Machado, Fabricio / Kollmeyer, Phillip | SAE Technical Papers | 2022
    , temperature effects, and heating and cooling energy are included as well. The model predicts an EPA range of ...
    Verlag: Society of Automotive Engineers , SAE International

    Dynamic Modeling Method of Electric Vehicle Thermal Management System Based on Improved Moving Boundary Method

    Kong, HaiQin / Gao, Mingyang / Li, Ruilong et al. | SAE Technical Papers | 2022
    electric vehicles. In recent years, researchers have coupled the heat pump system and the battery cooling system to effectively improve the heating ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Research and development

    Battery Electric Vehicles Energy Consumption Breakdown from On-Road Trips1

    Tansini, Alessandro / Currò, Davide / Komnos, Dimitrios et al. | SAE Technical Papers | 2022
    a high variability in real-world energy consumption, as electric energy is used both for cabin heating and cooling, which might lead to ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: On-board diagnostics (OBD) , Navigation and guidance systems

    A Comparative Study on Fatigue Damage of Caldie™ from Different Manufacturing Routes

    Miller, Patricia / Lu, Pengyan / Yang, Qingyu et al. | SAE Technical Papers | 2022
    stress at high impact loading and large number of cycles. With continuous increase in sheet metal strength, the trim die service life becomes a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development

    A Comparison of THOR 50M Anthropomorphic Test Devices in Frontal Sled Tests When Equipped with and without On-Board Data Acquisition

    Dellicolli, Anthony / Dix, Jeff / Ward, Josh | SAE Technical Papers | 2022
    the ATD repeatability under each belt routing. Attention was given to the potential for a heating effect of the on-board DAS to influence the ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Safety regulations and standards , Data acquisition and handling

    Evaluation of Equivalent Temperature Using Thermal Factors : Validation of a Calculation Method Based on ISO 14505-4:2021 in a Vehicle Cabin

    Matsumoto, Akira / Oi, Hajime / Kondo, Ryota et al. | SAE Technical Papers | 2022
    This paper describes a method for evaluating the equivalent temperature in vehicle cabins based on the new international standard ISO 14505 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Simulation and modeling , Sun and solar , Research and development

    Reduction of Testing Time of PTCE/HTOE Tests Based on Real Road Load Profiles

    Haspl, Andreas / Winkler, Guenter / Leighton, Michael | SAE Technical Papers | 2022
    -motor, inverter and transmission gear box as well as the cooling systems (including ambient air flow) and heat exchangers. These components are ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Maintenance, repair, and overhaul (MRO)

    Optimal Analysis of Layout Parameters of SUV Engine Compartment Parts Based on Orthogonal Design

    Ni, Jimin / Zheng, Teng / Shi, Xiuyong et al. | SAE Technical Papers | 2022
    . Based on the fluid flow performance in the engine compartment of an SUV, this paper proposes local optimization plans of the cooling module ...
    Verlag: Society of Automotive Engineers , SAE International

    Influence of Wheel Bending Stiffness on Lateral Tire Characteristics

    Linden, Michael / Eckstein, Lutz / Schlupek, Martin et al. | Springer Verlag | 2022
    wheel is the first connecting element between the tire and the body of the vehicle. As a result, the wheel has an impact on the driving dynamic ...
    Schlagwörter: Wheel influence on tire properties

    Design of a Human-Centric Auto-Climate Control System for Electric Vehicles

    Tiwari, Ankit / Arsenault, Jeff / Mandali, Satya et al. | SAE Technical Papers | 2022
    cooling. Unlike the central HVAC system, localized heating and cooling devices such as climate-controlled seats, steering wheel heaters, neck ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heating, ventilation, and air conditioning systems (HVAC)