61–80 von 212 Ergebnissen
|

    Effects of Oil Formulation, Oil Separator, and Engine Speed and Load on the Particle Size, Chemistry, and Morphology of Diesel Crankcase Aerosols

    Sluder, C. Scott / Uy, Dairene / Storey, John et al. | SAE Technical Papers | 2016
    that the size distribution changes with load, and contains both a sub-micron and super-micron component. The chemical composition of the ...
    Verlag: Society of Automotive Engineers , SAE International

    Modeling the Ignitability of a Pilot Injection for a Diesel Primary Reference Fuel: Impact of Injection Pressure, Ambient Temperature and Injected Mass

    Sahoo, Dipankar / Perini, Federico / Miles, Paul C. et al. | SAE Technical Papers | 2014
    further work to focus on achieving fully comprehensive modeling with detailed chemical kinetics of the DPRF58 mixture and a full engine geometry ...
    Verlag: Society of Automotive Engineers , SAE International

    Impedance study of imidazoline inhibitors against hydrogen sulphide corrosion of steel

    Szyprowski, A.J. | Tema Archiv | 2002
    Seven homologous imidazoline inhibitors, the derivatives of cyclopentylic and cyclohexylonaphthenic acids, have been synthesised. The ...

    Modelling of NOx Storage + SCR Exhaust Gas Aftertreatment System with Internal Generation of Ammonia

    Chatterjee, Daniel / Weibel, Michel / Marek, Milos et al. | SAE Technical Papers | 2010
    relevant chemical and physical processes in the NSRC and SCR played a key role in the development of the combined NSRC+SCR system and enabled to ...
    Verlag: Society of Automotive Engineers , SAE International

    The Limitations of the Viscosity Index and Proposals for Other Methods to Rate Viscosity-Temperature Behavior of Lubricating Oils

    Zakarian, Jack | SAE Technical Papers | 2012
    simplicity and good correlation to a number of physical and chemical properties. However, the rating method suffers from a number of fundamental ...
    Verlag: Society of Automotive Engineers , SAE International

    The Application of New Approaches to the Analysis of Deposits from the Jet Fuel Thermal Oxidation Tester (JFTOT)

    Carter, Anastarsia / Snape, Colin / Lapthorn, Cris et al. | SAE Technical Papers | 2017
    techniques for the analysis of deposits will be described yielding both chemical and metrological characteristics of the deposits. Fourier Transform ...
    Verlag: Society of Automotive Engineers , SAE International

    The Development of Novel Fuel Dehydrating Icing Inhibitors

    De Lacy Costello, Benjamin / Costello, James F. / Lam, Joseph K.-W. et al. | SAE Technical Papers | 2013
    to identify novel chemical approaches to the dual management of both water contamination and ice formation in jet fuel.The strategy of using ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of the Molecular Structure of Individual Fatty Acid Alcohol Esters (Biodiesel) on the Formation of Nox and Particulate Matter in the Diesel Combustion Process

    Schönborn, Alessandro / Rogerson, John / Williams, John et al. | SAE Technical Papers | 2008
    consists of fatty acid mono-alkyl esters, which are produced by the trans-esterification reaction of plant oils with monohydric alcohols. The Plant ...
    Verlag: Society of Automotive Engineers , SAE International

    Direct Observation of Nucleus Structure and Nucleation Pathways

    Vekilov, Peter G. / Yau, S.-T. | NTRS | 2001

    Determination of Used Crankcase Oil Condition by Capillary Electrophoresis Analysis of Extracted Organic Acids

    Schneider, Eric W. / Halalay, Ion C. / Olson, Keith L. et al. | SAE Technical Papers | 2009
    proposed as a new chemical analysis method for evaluating the condition of engine oil and for studying the effects of high temperature-high load ...
    Verlag: Society of Automotive Engineers , SAE International

    Utilization of HVO Fuel Properties in a High Efficiency Combustion System: Part 2: Relationship of Soot Characteristics with its Oxidation Behavior in DPF

    Holderbaum, Bastian / Lüers, Bernhard / Honkanen, Markku et al. | SAE Technical Papers | 2014
    . Finally, the relationship of the PM physico-chemical properties (i.e. O2 content, C/O ratio, C/H ratio and microstructure parameters) is compared ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Biodiesel (B20) on Vehicle-Aged Engine Oil Properties

    Gangopadhyay, Arup / Uy, Dairene / Anderson, James E. et al. | SAE Technical Papers | 2010
    engine lubrication (through fuel dilution), as its physical and chemical properties are significantly different from those of petrodiesel. Many ...
    Verlag: Society of Automotive Engineers , SAE International

    Prediction of Spray Behavior in Injected by Urea SCR Injector and the Reaction Products

    Niwa, Akihiro / Matsumura, Eriko / Sakatani, Shogo et al. | SAE Technical Papers | 2017
    the SCR catalyst by using NH3 generated by the chemical reaction of urea. NH3 is produced by thermolysis of urea and hydrolysis of isocyanic ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of Oxygenated Fuels on Combustion and Soot Formation/Oxidation Processes

    Kurtz, Eric / Anderson, James E. / Manin, Julien et al. | SAE Technical Papers | 2014
    based on cetane number, oxygen content, molecular structure, and the presence of an aromatic hydrocarbon. The experiments compared different ...
    Verlag: Society of Automotive Engineers , SAE International

    Compositional Effects of Gasoline Fuels on Combustion, Performance and Emissions in Engine

    Ahmed, Ahfaz / Singh, Eshan / Sarathy, Mani et al. | SAE Technical Papers | 2016
    physical and chemical properties. Such an investigation is required to interpret differences in combustion behavior of gasoline fuels that show ...
    Verlag: Society of Automotive Engineers , SAE International

    Calculation of Heating Value for Diesel Fuels Containing Biodiesel

    Geng, Pat / Furey, Robert / Lopes, Shailesh Martin | SAE Technical Papers | 2013
    Biodiesel, a fuel comprised of mono-alkyl esters of long-chain fatty acids also known as Fatty Acid Methyl Esters(FAME), derived from ...
    Verlag: Society of Automotive Engineers , SAE International

    Ignition Characteristics of Ethane and Its Roles in Natural Gas for HCCI Engine Operation

    Tanaka, Hiroki / Kuwahara, Kazunari / Kobayashi, Kazunobu et al. | SAE Technical Papers | 2015
    The ignition characteristics of each component of natural gas and the chemical kinetic factors determining those characteristics were ...
    Verlag: Society of Automotive Engineers , SAE International

    Optical and Numerical Investigations on the Mechanisms of Deposit Formation in SCR Systems

    Smith, Henrik / Mayer, Mattias / Pierson, Steven et al. | SAE Technical Papers | 2014
    Long-term reliability is one of the major requirements for the operation of automotive exhaust aftertreatment systems based on selective ...
    Verlag: Society of Automotive Engineers , SAE International

    Simplified and Detailed Chemistry Modeling of Constant-Volume Diesel Combustion Experiments

    Ettorre, D. / D'Errico, G. / Lucchini, T. | SAE Technical Papers | 2008
    The high complexity of the interplaying physical and chemical phenomena occurring in Diesel combustion has brought an increasing interest ...
    Verlag: Society of Automotive Engineers , SAE International

    Detailed Kinetic Modeling of HCCI Combustion with Isopentanol

    Dec, John E. / Tsujimura, Taku / Pitz, William J. et al. | SAE Technical Papers | 2011
    energy density is over 30% higher than ethanol, and it is less hygroscopic.Some fundamental combustion properties of isopentanol in an HCCI ...
    Verlag: Society of Automotive Engineers , SAE International