Combination of an NOx storage and reduction catalyst (NSRC, called also lean NOx trap, LNT) and a catalyst for the selective catalytic reduction of NOx by NH₃ (NH₃-SCR) offers a potential to significantly increase the efficiency of NSRC-based exhaust gas aftertreatment systems. Under most situations the SCR catalyst is able to adsorb the NH₃ peaks generated in the NSRC during the regeneration and utilize it for additional NOx reduction in the course of the consequent lean phase. This synergy becomes more important with the aged NSRC, where generally lower NOx conversions and higher NH₃ yields in wider range of operating temperatures are observed (in comparison with the fresh or de-greened NSRC).In this paper we present global kinetic models for the NSRC (Pt/Ba/Ce/gγ-Al₂O₃ catalyst type) and NH₃-SCR (Fe-ZSM5 catalyst type). The NSRC regeneration by a mixture of CO, H₂ and HC is considered with a differentiated activity and selectivity of individual reducing agents in the NOx reduction. The oxygen storage effects and NH₃ oxidation reactions are also included in the NSRC model. A non-equilibrium spill-over of the adsorbed NH₃ between the non-reactive and reactive sites is involved in the SCR model. The kinetic parameters are evaluated from transient lab experiments with synthetic gases, individually for the NSRC and SCR, and the models are then validated by engine test data.The performance of the NSRC+SCR system is simulated in dependence on temperature and rich phase length, and their effects on integral NOx conversions and NH₃ yields are discussed. Defined periodic lean/rich operation is simulated as well as the test driving cycle FTP. The simulation results show that the added SCR can significantly improve the deNOx efficiency in a wide range of operating conditions. The mechanistic understanding and modeling of the relevant chemical and physical processes in the NSRC and SCR played a key role in the development of the combined NSRC+SCR system and enabled to bring this technology to series production within the BlueTec I system (2006).


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modelling of NOx Storage + SCR Exhaust Gas Aftertreatment System with Internal Generation of Ammonia


    Weitere Titelangaben:

    Sae Int. J. Fuels Lubr
    Sae International Journal of Fuels and Lubricants


    Beteiligte:
    Chatterjee, Daniel (Autor:in) / Weibel, Michel (Autor:in) / Marek, Milos (Autor:in) / Koci, Petr (Autor:in) / Schmeisser, Volker (Autor:in)

    Kongress:

    SAE 2010 World Congress & Exhibition ; 2010



    Erscheinungsdatum :

    2010-04-12


    Format / Umfang :

    23 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Modelling of NOx storage plus SCR exhaust gas aftertreatment system with internal generation of ammonia

    Chatterjee,D. / Koci,P. / Schmeisser,V. et al. | Kraftfahrwesen | 2010


    Automotive exhaust aftertreatment system having an ammonia distributor

    TUCKER ALFRED / DIMPELFELD PHILIP | Europäisches Patentamt | 2019

    Freier Zugriff

    Modelling and Optimization of SCR-Exhaust Aftertreatment Systems

    Chen, Ming / Williams, Shazam | SAE Technical Papers | 2005


    Modelling and optimization of SCR-exhaust aftertreatment systems

    Chen,M. / Williams,S. / DCL International,US | Kraftfahrwesen | 2005


    EXHAUST GAS AFTERTREATMENT SYSTEM CONTROL

    N KOTI ARCHIT | Europäisches Patentamt | 2020

    Freier Zugriff