1–20 von 21 Ergebnissen
|

    Method for an electronic controlled platooning system of agricultural vehicles

    Zhang, X. / Geimer, M. / Grandl, L. et al. | Tema Archiv | 2009
    avoiding obstacle, turning at the end of the field have been considered. With the aid of the RTK GPS systems the position of the leading tractor ...
    Verlag: IEEE Operations Center , Piscataway

    A new nonlinear control for vehicle in sliding conditions: application to automatic guidance of farm vehicles using RTK GPS

    Lenain, R. / Thuilot, B. / Cariou, C. et al. | Tema Archiv | 2004
    Since Global Navigation Satellite systems are able to supply very accurate coordinates of a point (about 2 cm with a RTK GPS), such a ...
    Verlag: IEEE Operations Center , Piscataway

    Approximation-based control and avoidance of a mobile base with an onboard arm for MARS greenhouse operation

    Jagannathan, S. / Levesque, A. / Singh, Y. | Tema Archiv | 2001
    MARS greenhouse needs mobile robots with on-board arms, that are capable of navigating autonomously in the greenhouse, performing tasks ...
    Verlag: IEEE Operations Center , Piscataway

    The use of highly automated machines in an orchard

    Kellum, C. Christopher / Moorehead, Stewart / Wellington, Carl | Tema Archiv | 2012
    , providing an improvement in efficiency of orchard operations. Future work will focus on improving reliability and understanding how many machines ...

    The reuse of wastewater and sludge for cultivation of forestry trees in desert areas in Greece

    Kalavrouziotis, Ioannis K. / Hortis, Theofanis C. / Drakatos, Panagiotis A. | Tema Archiv | 2004
    Processed wastewaters and sludges can be used in the irrigation of forest and desert areas for the cultivation of different plant species ...

    A new multi-purpose 4WD prime mover for oil palm plantation mechanisation

    Darius El Pebrian / Azmi Yahya | Tema Archiv | 2012
    Advancements of oil palm mechanisation in Malaysia were very much constrained by the availability of an appropriate design prime mover to ...

    Evaluation of factors and current approaches related to computerized design of tillage tools: a review

    Kushwaha, R.L. / Zhang, Z.X. | Tema Archiv | 1998
    for the computer-aided design of tillage tools. An overview related to the dynamic effect on the performance of tillage operations has been ...

    Multi-objective-reliability-based optimisation of a farm tractor front axle suspension

    Previati, Giorgio / Gobbi, Massimiliano / Mastinu, Gianpiero | Tema Archiv | 2011
    This paper deals with the design and optimisation of a front suspension to be fitted on a standard low range farm tractor. The design ...

    Validation of an agricultural tractor MBS model

    Lehtonen, T.J. | Tema Archiv | 2005
    This paper describes a MBS (Multibody System) model of an agricultural tractor and its validation using experimental measurements on a test ...

    Musculoskeletal symptoms among drivers of all-terrain vehicles

    Rehn, B. / Bergdahl, I.A. / Ahlgren, C. et al. | Tema Archiv | 2002
    The aim of this cross-sectional study was to characterize the risk of experiencing musculoskeletal symptoms in the region of the neck ...

    Intelligent control rule for tractor with continuously variable transmission

    Zhang, Yingjun / Zhou, Zhili / Zhou, Xuejian | Tema Archiv | 2006
    The problem considered in this paper is the design of the control rule for a tractor equipped with continuously variable transmission. In a ...
    Verlag: IEEE Operations Center , Piscataway

    Robust pose estimation for a car-like vehicle

    Usher, K. / Dunbabin, M. / Corke, P. et al. | Tema Archiv | 2004
    In this paper, we outline the sensing system used for the visual pose control of our experimental car-like vehicle, the autonomous tractor ...
    Verlag: IEEE Operations Center , Piscataway

    A model to assess tractor operational efficiency from bench test data

    Lacour, S. / Burgun, C. / Perilhon, C. et al. | Tema Archiv | 2014
    testing procedures which are assumed to reflect a variety of agricultural operations. However, the resulting diagnostic, based on an annual ...

    A fuzzy-genetic based embedded-agent approach to learning and control in agricultural autonomous vehicles

    Hagras, H. / Callaghan, V. / Colley, M. et al. | Tema Archiv | 1999
    This paper describes the design of a fuzzy controlled autonomous robot, incorporating genetic algorithms (GA) based rule learning, for use ...
    Verlag: IEEE Operations Center , Piscataway

    Fundamentals of ice making by convection cooling followed by contact melting

    Vargas, J.V.C. / Bejan, A. | Tema Archiv | 1995
    In this paper it was shown that the production of ice by convection cooling followed by contact melting can be maximized by properly ...

    Collecting data by voice recognition for precision agriculture

    Dux, D.L. / Strickland, M. / Ess, D.R. | Tema Archiv | 1997
    problems, crop lodging, point rows, and machinery operations. This information can be georeferenced using the same GPS locations used for the yield ...

    Increasing seat belt usage in logging machinery

    Sullman, M.J.M. | Tema Archiv | 1998
    being primarily responsible for the low level of skidder operator seat belt usage were simply forgetting to use the seat belt and the ...

    Path planning algorithms for a GPS based electronic tow bar

    Noack, Patrick O. / Kammerbauer, Bernd / Schönfelder, Martin | Tema Archiv | 2010
    farming operations and the development of larger machinery. On the other hand, both size and weight of tractors and implements are limited by the ...

    An indoor traction measurement system for agricultural tires

    Kawase, Yoshiyuki / Nakashima, Hiroshi / Oida, Akira | Tema Archiv | 2006
    To reliably study soil-wheel interactions, an indoor traction measurement system that allows creation of controlled soil conditions was ...

    Optimal dynamic motion sequence generation for multiple harvesters

    Bochtis, D. / Vougioukas, S.G. / Tsatsarelis, C. et al. | Tema Archiv | 2006
    execution of harvesting operations, especially in case of cooperating harvesters, needs to be carefully planned. In this paper, the operation ...