1–20 von 213 Ergebnissen
|

    Use of Artificial Neural Network to Develop Surrogates for Hydrotreated Vegetable Oil with Experimental Validation in Ignition Quality Tester

    Joshi, Gaurav / Henein, Naeim / Alkhayat, Samy | SAE Technical Papers | 2024
    This article presents surrogate mixtures that simulate the physical and chemical properties in the auto-ignition of ...
    Verlag: Society of Automotive Engineers , SAE International

    Effects of Pre-spark Heat Release of Ethanol-Blended Gasoline Surrogate Fuels on Engine Combustion Behavior

    Kusaka, Jin / Yoshimura, Kei / Isobe, Kohei et al. | SAE Technical Papers | 2023
    mixture caused by its PSHR. Additional simulations examining the chemical effect of partially oxidized reactants caused by ...
    Verlag: Society of Automotive Engineers , SAE International

    Steer Guidance Of Autonomous Agricultural Robot Based On Pure Pursuit Algorithm And LiDAR Based Vector Field Histogram

    Freier Zugriff
    Rai Bijay / Matsa Amarendra / Datta Asim | DOAJ | 2023
    The application of autonomous robots has been increasing in agriculture sector to substitute human labour and to improve the production ...
    Schlagwörter: Chemical engineering

    Real-Time Simulation of CNG Engine and After-Treatment System Cold Start Part 1: Transient Engine-Out Emission Prediction Using a Stochastic Reactor Model

    Mauss, Fabian / Rottengruber, Hermann / Oder, Johannes et al. | SAE Technical Papers | 2023
    and tabulated chemistry. The tabulated chemistry approach allows to account for the physical and chemical properties of natural gas fuels in ...
    Verlag: Society of Automotive Engineers , SAE International

    Hybrid Electric Vehicle Engine Operation and Engine Oil Degradation: A Research Approach

    Joedicke, Arndt / Growney, David / Davies, Mark et al. | SAE Technical Papers | 2023
    drive cycle on the engine oil degradation and contamination. Finally, an analysis of the chemical and physical properties of ...
    Verlag: Society of Automotive Engineers , SAE International

    Chemical Kinetic Modeling of Hydrogen-Diesel Co-combustion in Compression Ignition Engines

    Micklow, Gerald J. / Helldorff, Helge von | SAE Technical Papers | 2022
    The concurrent combustion of Diesel and hydrogen in a 1999 Cummins ISM 370 heavy-duty compression ignition engine was ...
    Verlag: Society of Automotive Engineers , SAE International

    Effect of Blended Fuel of Hydrotreated Vegetable Oil and Fatty Acid Methyl Ester on Spray and Combustion Characteristics

    Matsumura, Eriko / Senda, Jiro / Koshikawa, Shoi | SAE Technical Papers | 2022
    Research on alternative fuels is necessary to reduce CO2 emissions. Hydrotreated Vegetable Oil (HVO) of light fuel physically improves ...
    Verlag: Society of Automotive Engineers , SAE International

    Experimental Investigation of Urea Deposit Formation in Selective Catalyst Reduction System to Guide Product Development

    Alembath, Anand / Shinde, Atul / Mooney, Brian et al. | SAE Technical Papers | 2022
    chemical composition of the generated deposits. The experiment concluded that higher temperatures within a liquid film ...
    Verlag: Society of Automotive Engineers , SAE International

    Detailed Compositional Comparison of Hydrogenated Vegetable Oil with Several Diesel Fuels and Their Effects on Engine-Out Emissions

    Coffey, Gregory W. / Linehan, John C. / Campbell, Kristen B. et al. | SAE Technical Papers | 2022
    to the chemical characterization of transportation fuels. This article complements a 2017 CRC project to quantify ...
    Verlag: Society of Automotive Engineers , SAE International

    Chemical Analysis of Deposits Separated from Blocked Fuel Filters

    Neville, Anne / Morina, Ardian / Forsberg, Carina et al. | SAE Technical Papers | 2021
    Gas Chromatography/Mass Spectrometry [GC/MS]) to understand the chemical composition of the filter deposits and highlight ...
    Verlag: Society of Automotive Engineers , SAE International

    Predicting Ignition Quality of Oxygenated Fuels Using Artificial Neural Networks

    Abdul Jameel, Abdul Gani / Emwas, Abdul-Hamid / Naser, Nimal et al. | SAE Technical Papers | 2021
    predicting complex chemical phenomena like combustion properties. The present work deals with the development of an ANN model that can predict the ...
    Verlag: Society of Automotive Engineers , SAE International

    Sulfur Poisoning of a Cu-SSZ-13 SCR Catalyst under Simulated Diesel Engine Operating Conditions

    Su, Changsheng / Ottinger, Nathan / Xi, Yuanzhou et al. | SAE Technical Papers | 2021
    (SCR) due to their high conversion efficiency and excellent hydrothermal stability. Diesel engine exhaust contains small amounts of SOx due to ...
    Verlag: Society of Automotive Engineers , SAE International

    Investigation into Low-Temperature Urea-Water Solution Decomposition by Addition of Titanium-Based Isocyanic Acid Hydrolysis Catalyst and Surfactant

    Henry, Cary / Wright, Nolan / Hartley, Ryan et al. | SAE Technical Papers | 2020
    objective of this work was to expand the knowledge base of a potential third option, which entails chemical modification of UWS by addition of a ...
    Verlag: Society of Automotive Engineers , SAE International

    Thermal Analysis of Aircraft Auxiliary Power Unit: Application of Chemical Looping Combustion

    Singh, Anand Shankar / AKRAM, MD / Kumar, Prashant et al. | SAE Technical Papers | 2019
    by a chemical-looping-combustion (CLC) system. CLC system consist of two reactor one is oxidation reactor (air reactor) and the other is ...
    Verlag: Society of Automotive Engineers , SAE International

    Development of a Novel Machine Learning Methodology for the Generation of a Gasoline Surrogate Laminar Flame Speed Database under Water Injection Engine Conditions

    Forte, Claudio / Bianchi, Gian Marco / Cazzoli, Giulio et al. | SAE Technical Papers | 2019
    correlations. In order to generate a database with all the possible combinations of chemical and physical properties that can be reached during the ...
    Verlag: Society of Automotive Engineers , SAE International

    Assessment of Hydrotreated Vegetable Oil (HVO) Applicability as an Alternative Marine Fuel Based on Its Performance and Emissions Characteristics

    Lefebvre, Nicolas / Ushakov, Sergey | SAE Technical Papers | 2019
    number of HVO together with its superior chemical composition (overall higher H/C ratio, absence of aromatics and heavy-boiling compounds) plays ...
    Verlag: Society of Automotive Engineers , SAE International

    Experimental Analysis of SCR Spray Evolution and Sizing in High-Temperature and Flash Boiling Conditions

    Brizi, Gabriele / Postrioti, Lucio / van, Nic | SAE Technical Papers | 2019
    In the last years, new stringent emission legislation in terms of nitrogen oxides (NOx) has been leading to a massive development of ...
    Verlag: Society of Automotive Engineers , SAE International

    Assessing the Impact of FAME and Diesel Fuel Composition on Stability and Vehicle Filter Blocking

    Roy-Smith, Christopher / Bannister, Christopher D. / Chuck, Christopher J. et al. | SAE Technical Papers | 2019
    a large body of work on the oxidative instability of biodiesel in the chemical laboratory is indicative of instability this does not mimic ...
    Verlag: Society of Automotive Engineers , SAE International

    The Effect of Diluent Gases on High-Pressure Laminar Burning Velocity Measurements of an Advanced Biofuel Ketone

    Almansour, Bader / Kim, Gihun / Vasu, Subith | SAE Technical Papers | 2018
    data points can be extracted out of a single experiment (up to 10 atm and 503 K) which brings several validation targets for DIPK chemical ...
    Verlag: Society of Automotive Engineers , SAE International

    Mechanisms of Enhanced Reactivity with Ozone Addition for Advanced Compression Ignition

    Foucher, Fabrice / Ekoto, Isaac | SAE Technical Papers | 2018
    , research engine configured for low-load advanced compression ignition (ACI) experiments. The influence of O3 concentration (0-40 ppm) on engine ...
    Verlag: Society of Automotive Engineers , SAE International