1–50 von 9,926 Ergebnissen
|

    1D Modeling of Alternative Fuels Spray in a Compression Ignition Engine Using Injection Rate Shaping Strategy

    Perozziello, Carmela / Mancaruso, Ezio / Sequino, Luigi | SAE Technical Papers | 2019
    strategies has been set up for the Injection Rate Shaping. Experimental data collected in an optical single-cylinder compression ignition research ...

    1 kW Power Transmission Using Wireless Acoustic-Electric Feedthrough (WAEF)

    Sherrit, S. / Bao, X. / Badescu, M. et al. | ASCE | 2008
    structure. One particular application of this technology is in sample return missions where it is critical to preserve the sample integrity and to ...
    Schlagwörter: Research

    2D/3D Painted TPO Fascia Testing to Mimic Real World Friction Induced Damage by Cohesive and Delamination Failures

    Ramamurthy, A. C. / Mihora, Dennis J. / Venditto, Virgil A. | SAE Technical Papers | 1998
    forces exceeding 5000. N. 2D tests provide the cost effective approach to materials research by isolating the failure mechanics in the upper 250 ...
    Schlagwörter: Research and development

    3D CFD Analyses of Intake Duct Geometry Impact on Tumble Motion and Turbulence Production in SI Engines

    Iorio, Agostino / Romagnuolo, Luca / Maresca, Luigi et al. | SAE Technical Papers | 2017
    In recent years, engine manufacturers have been continuously involved in the research of proper technical solutions to meet more and more ...

    3DCFD-Modeling of a Hydrogen Combustion-Process with Regard to Simulation Stability and Emissions

    Dafis, Aristidis / Rottengruber, Hermann / Jochmann, Paul | SAE Technical Papers | 2023
    In the context of the energy transition, CO2-neutral solutions are of enormous importance for all sectors, but especially for the mobility ...
    Schlagwörter: Research and development

    3D Computational Methodology for Bleed Air Ice Protection System Parametric Analysis

    Silva, Daniel / Domingos, Rodrigo | SAE Technical Papers | 2015
    shape computation. The icing tunnel data used in the validation of the proposed computer model were obtained at the NASA Icing Research Tunnel ...

    3-Dimensional Simulation of Vehicle Response to Tire Blow-outs

    Day, Terry D. / Grimes, Wesley D. / Blythe, William | SAE Technical Papers | 1998
    model by direct comparison with experiments conducted at the Transportation Research Center (TRC), in East Liberty, Ohio. The paper also ...

    3D map building for slopes based on modeling of mobile robot

    Hwang, Yo-Seop / Kim, Hyun-Woo / Lee, Dong-Ju et al. | IEEE | 2014
    . This research, the scanning operations are performed while the mobile robot moved on the slanted surface and ground without stops. The motion ...

    3-D Modeling of Diesel Engine Intake Flow, Combustion and Emissions

    Rutland, C.J. / Reitz, Rolf D. | SAE Technical Papers | 1991
    research efforts towards improving the performance of diesel engines. The objective of the present program is to develop a comprehensive analytical ...

    3D Modelling and Photographic Investigation of Combustion in Hydra DI Diesel Engine

    Winterbone, D. E. / Moses, E. / Rao, K. K. | SAE Technical Papers | 1996
    High speed photographs of spray and combustion, obtained from a Hydra direct injection research diesel engine are compared with the ...
    Schlagwörter: Research and development

    3D Numerical Analysis of Embedded Tunneling on Adjacent Existing Deep Excavation

    Li, Hongjian | ASCE | 2008
    are quite many, which are considered with difficulty in the design stage completely. The useful data are getting to guide the construction of ...
    Schlagwörter: Research

    3D Numerical Simulations for Response and Performance Prediction of Railway Composite Track Slabs under Derailments

    Wang, Yikai / Kaewunruen, Sakdirat / Theofanous, Marios et al. | ASCE | 2018
    to heavy casualties and property losses, such as Grayigg train derailment in 2007. Therefore, the research presented herein has focus ...

    3D Particle Characteristics of Highland Lunar Soil (No. 60501) Obtained by Micro X-Ray CT

    Matsushima, T. / Katagiri, J. / Saiki, K. et al. | ASCE | 2008
    ratio, flatness ratio and sphericity are computed for representative particles by image processing. Furthermore, in order to evaluate the ...
    Schlagwörter: Research

    3D Simulations And Experimental Validation of High EGR - PHCCI Combustion

    de Risi, A. / Laforgia, D. / Zurlo, S. et al. | SAE Technical Papers | 2007
    , obtained by the application of EGR up to 60% without using detailed kinetic models. In particular, the laminar and turbulent time characteristic ...

    4D automatic flight path control in pilot assistance system

    Bantle, Jochen / Melz, Christian | Tema Archiv | 2009
    Research on pilot assistance systems at Eurocopter has lead to the development of an automatic 4D flight path control as part of a ...

    4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012 : [21 - 25 July 2012; proceedings] / [ed. Gavriel Salvendy ...] ; [9]: Advances in human aspects of road and rail transportation

    Stanton, Neville / Salvendy, Gavriel | TIBKAT | 2013
    "Human factors and ergonomics have made considerable contributions to the research, design, development, operation and analysis of ...

    4WD mobile robot for autonomous steering using single camera based vision system

    Hyuc Ko, Min / Chul Kim, Kyoung / Suprem, Abhijit et al. | Emerald Group Publishing | 2014

    – The platform can be used for agricultural operations such as crop scouting, monitoring, spraying, and mapping in a medium to large-scale

     ...

    4WS Technology and the Prospects for Improvement of Vehicle Dynamics

    Kuroki, Junsuke / Irie, Namio | SAE Technical Papers | 1990
    FOUR-WHEEL STEERING (4WS) is beginning to find widespread use as a new approach to improving vehicle dynamics, especially in the medium and ...
    Schlagwörter: Research and development

    5G Private Network Assessment for Port Industrial Area: Study case in Port of Tanjung Priok

    Andriani, Olyvia Fransiska / Nashiruddin, Muhammad Imam / Adriansyah, Nachwan Mufti | IEEE | 2023
    The Industrial Revolution 4.0 supports digital transformation and connected systems in industrial areas. In the port industry, integrating ...

    6DOF Metrology-integrated Robot Control

    Kihlman, Henrik / Loser, Raimund | SAE Technical Papers | 2003
    operations and for dynamic force compensation. To detect and compensate deflection in industrial robots during a process, the robot uses a metrology ...
    Schlagwörter: Research and development

    17th International Microgravity Measurements Group Meeting

    DeLombard, Richard | NTRS | 1998
    ) in Brook Park, Ohio. This meeting focused on the transition of microgravity science research from the Shuttle, Mir, and free flyers to the ...

    17th International Microgravity Measurements Group Meeting

    R. DeLombard | NTIS | 1998
    ) in Brook Park, Ohio. This meeting focused on the transition of microgravity science research from the Shuttle, Mir, and free flyers to the ...
    Verlag: National Aeronautics and Space Administration, Cleveland, OH. Lewis Research Center

    21st Century Earth Observing Systems: Emerging Role for Spaceports

    Morain, Stanley A. | ASCE | 1996
    research missions; the growth of commercial sensor systems and private launch capabilities; and the miniaturization of sensor systems for orbit ...
    Schlagwörter: Research

    42 Volt System

    Lu, Steven | SAE Technical Papers | 2001
    system as standard. In the U.S., that number (42 volts) was selected by an industry-wide research consortium led by the Massachusetts Institute ...

    135 Days in Isolation and Confinement: The Hubes Simulation

    Bichi, Alessandro F. / Vaernes, Ragnar J. | SAE Technical Papers | 1995
    by integration of 31 experiments from more than 80 research proposals from Principal Investigators from Europe, USA and Russia, in domains of ...
    Schlagwörter: Research and development

    980 XK: A Critical Automotive Application for HSLA Steel

    Jurkowski, John J. / Keller, Robert N. | SAE Technical Papers | 1977
    and have been successfully incorporated in production operations. ...

    1970s Development of 21st Century Mobile Dispersed Power

    Eltinge, Lamont | SAE Technical Papers | 1973
    supplies in the United States and will do so for the world before 2000; this portends major changes and cost increases.The twenty-first century ...
    Schlagwörter: Research and development

    1971 Cars and the “New” Gasolines

    Rogers, J. D. / Poskitt, R. W. / Morris, W. E. | SAE Technical Papers | 1971
    in the same cars to obtain further insight into the effects of research octane number, motor octane number, and lead content on road octane ...

    1978 U. S. Automotive Service Market: How Large is Large?

    DeWeese, Lemuel Carroll | SAE Technical Papers | 1981
    The size of the 1978 automotive service market is the total dollars spent on car and truck repair and maintenance in 1978. The 1978 ...

    1990 Clean Air Act Impacts on Finishing Technology and Operations in the Medium and Heavy Duty Truck & Bus Industry

    Schultz, Karl R. | SAE Technical Papers | 1995
    The Clean Air Act Amendments of 1990 have brought about wholesale changes in the mandated requirements for the EPA and states to bring ...

    1991 International Conference on Aging Aircraft and Structural Airworthiness

    Charles E. Harris | NTRS | 1991
    participation by all interested parties. Thus, the 2nd International Conference was held in 1989 in Baltimore and the third in the series in 1990 in ...

    1999 Marsokhod Field Experiment: A Simulation of a Mars Rover Science Mission

    C. Stoker / N. Cabrol / T. Roush et al. | NTIS | 1999
    A field experiment to simulate a rover mission to Mars was performed in February 1999. This experiment, the latest in a series of rover ...
    Verlag: National Aeronautics and Space Administration, Moffett Field, CA. Ames Research Center

    2012 Ground Testing Highlights

    Buchholz, Steven J. | NTRS | 2012
    stress during normal test operations. A very unusual test was completed in the 11 FT TWT to acquire aerodynamic and flow field data for the Crew ...
    Schlagwörter: Research And Support Facilities (Air)

    4994 Tractor Hydraulic System

    Palmersheim, G.M. | SAE Technical Papers | 1984
    J I Case Company has produced four-wheel-drive agricultural tractors since 1964. In 1984 however, the flagship of the Case fleet changed ...

    9000T Series John Deere Track Tractors

    Cote, Brad / Niebuhr, Dan / Kreis, Ed et al. | SAE Technical Papers | 2000
    425-HP 9400T tractors were designed with input from customers to meet customers' needs. Through customer input, on-farm research, and common ...
    Schlagwörter: Research and development

    A 2-D Computational Model Describing the Heat Transfer, Reaction Kinetics and Regeneration Characteristics of a Ceramic Diesel Particulate Trap

    Opris, Cornelius N. / Johnson, John H. | SAE Technical Papers | 1998
    parametric study performed in this research indicated that an optimum trap configuration can be achieved by changing the material properties (e.g ...

    A 3D laser scanner system for autonomous vehicle navigation

    Maurelli, F. / Droeschel, D. / Wisspeintner, T. et al. | Tema Archiv | 2009
    replication of our system by interested parties or to get a cheap 3D laser scanner for research for those who do not wish to invest in hardware ...
    Verlag: IEEE Operations Center , Piscataway

    AAF in the Invasion of Southern France

    NTIS | 1992
    amphibious assault designed to undercut German defenses in occupied France. Part of the Wings at War Commemorative Booklets series. 60 pp., maps ...
    Schlagwörter: Military Operations, Strategy, & Tactics , Air force operations , Air force research , Amphibious operations

    AAH, The Latest Development in Microgravity Animal Research

    Emmerich, Jeffery C. / Iverson, Jeffery T. / Lee, Mark C. | SAE Technical Papers | 2005
    The Advanced Animal Habitat (AAH) represents the next generation of Space Station based animal research facilities. Building upon ...
    Schlagwörter: Research and development

    AARS: The Automated Aircraft Rework System

    Benoit, Michael J. | SAE Technical Papers | 1995
    The Mercer Engineering Research Center (MERC), under contract to the United States Air Force (USAF), was responsible for providing the ...

    A Bayesian Network Approach to Evaluate Shipboard Launch and Recovery Performance in Early-Stage Ship Design

    Coller, James A. / Singer, David J. | Springer Verlag | 2020

    Vessel performance in shipboard launch and recovery operations is a critical element of its overall mission

     ...

    A Bench Test Study of Port Fuel Injection Fouling

    Bennett, Joshua J. / Miller, Keith T. / Hou, Peter W. et al. | SAE Technical Papers | 2008
    Bench Procedure”, was developed by South West Research Institute (SWRI) and the procedure standardized by the Coordinating Research Council (CRC ...

    A Benefit, Cost and Risk Analysis for the Stakeholders of a 4th Party Logistics e-Business Platform

    Chu, Sung-Chi / Leung, Lawrence C. / Hui, Yer et al. | Springer Verlag | 2004
    Schlagwörter: Operations Management , Operation Research/Decision Theory

    A Brief Discussion of Winning Mechanism of Intelligentized Warfare

    Wang, Shuxin / Wang, Yujin / Ou, Hongyan et al. | Springer Verlag | 2023
    intelligentized warfare transformation. Building an intelligentized army and executing intelligent operations have become the future development direction ...
    Schlagwörter: mode of operations

    A Building for Testing European Rovers and Landers under Simulated Surface Conditions: Part 1 - Design and Phasing

    Nixon, David / Ovrum, Truls | SAE Technical Papers | 2008
    first support the European ExoMars mission due for launch in 2013. This mission will deliver a robotic rover to the Martian surface. This paper ...

    Academic Principles of Human Space Habitat Design

    Klaus, David M. / Higdon, Kevin P. | SAE Technical Papers | 2009
    consumables, remove undesirable waste products, and maintain environmental conditions that are conducive to life, health and operations. Propulsive ...

    A Calculation Procedure for the Evaluation of Cold Emissive Behavior of High-Performance Motorcycles

    Senatore, Adolfo / Prati, Maria Vittoria / Iodice, Paolo | SAE Technical Papers | 2011
    All the experimental investigations performed in the last years on newly sold motorcycles, equipped with a three-way catalyst and ...

    A Case for Open Source in Automotive Embedded Systems

    Devi, L Yaamini / Gopalakrishnan, S | SAE Technical Papers | 2005
    The role of Embedded systems is becoming more and more dominant in the Automotive segment. The proprietary products and Commercial-Off-The ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India

    A Case for RFID in Indian Automotive Industry

    Ansari, Ashfaque Ahmed / Murali, S / Natarajan, Venkatesh | SAE Technical Papers | 2005
    data flow in supply chain could be one of the most significant developments. This paper presents the case for RFID implementation in automotive ...
    Verlag: Society of Automotive Engineers , The Automotive Research Association of India