Synonyme wurden verwendet für: Werkstoff
Suche ohne Synonyme: keywords:(Werkstoff)

301–350 von 361 Ergebnissen
|

    Macroscale Independently Homogenized Subcells for Modeling Braided Composites

    Blinzler, Brina J. / Goldberg, Robert K. / Binienda, Wieslaw K. | AIAA | 2012
    Schlagwörter: Mechanics of Materials

    Heat Transfer to a Composite Material Under Ice Particle Impacts

    Hong, Y. K. / Park, C. / Baek, S. W. | AIAA | 2010
    Schlagwörter: Composite Materials

    Investigation on the Designing of the Metal Diaphragm in Pulse Solid Rockets

    Chunguang, Wang / Quanbin, Ren / Weiping, Tian | AIAA | 2015
    Schlagwörter: Strength of Materials

    Modeling of Stardust Reentry Ablation Flows in the Near-Continuum Flight Regime

    Zhong, Jiaqiang / Ozawa, Takashi / Levin, Deborah A. | AIAA | 2008
    Schlagwörter: Ablative Materials

    Analysis of Residual Stresses Induced by Riveting Process and Fatigue Life Prediction

    Zheng, Bin / Yu, Haidong / Lai, Xinmin et al. | AIAA | 2016
    Schlagwörter: American Society for Testing and Materials

    Repair Tolerance Analysis for Composite Structures Using Probabilistic Methodologies

    Chen, Xi / Ren, He / Bil, Cees et al. | AIAA | 2014
    Schlagwörter: Composite Materials

    Equation of State for Energetic Structural Materials

    Reding, D. / Hanagud, S. | AIAA | 2009
    Schlagwörter: Porous Materials

    Heat Flux Calibration Measurement Using the Noninteger System Identification Method for Cooled Surfaces

    Löhle, Stefan / Fuchs, Ulf | AIAA | 2011
    Schlagwörter: Porous Materials

    Powder Geometry Based Models for Sintered Media Porosity and Effective Thermal Conductivity

    Florez, Juan Pablo M. / Mantelli, Marcia B. H. / Nuernberg, Gustavo G. V. et al. | AIAA | 2014
    Schlagwörter: American Society for Testing and Materials

    Energy Storage by Melting Commercial Change Phase Materials in Hexagonal-Shaped Heat Exchangers

    Begum, Latifa / Hasan, Mainul / Vatistas, Georgios H. | AIAA | 2018
    Schlagwörter: Phase Change Materials

    OpticalWireless Links for Intra-Satellite Communications: Reflection Models and Hardware Optimization

    Tamayo, Remo / Alonso, José / Jimenez, Juan Jose et al. | AIAA | 2010
    Schlagwörter: Aerospace Materials

    Numerical Simulations of Multiscale Ablation of Carbon/Carbon Throat with Morphology Effects

    Qin, Fei / Peng, Li-Na / Li, Jiang et al. | AIAA | 2017
    Schlagwörter: Composite Materials

    Robust Control of Uncertain Piezoelectric Laminated Plates Based on Model Reduction

    Wang, Xiaobing / Liu, Yinghua / Gao, Wei et al. | AIAA | 2011
    Schlagwörter: Piezoelectric Materials

    Concurrent Active Piezoelectric Control and Energy Harvesting of Highly Flexible Multifunctional Wings

    Tsushima, Natsuki / Su, Weihua | AIAA | 2016
    Schlagwörter: Piezoelectric Materials

    Numerical Investigation of Second-Mode Attenuation over Carbon/Carbon Porous Surfaces

    Sousa, Victor C. B. / Patel, Danish / Chapelier, J.-B. et al. | AIAA | 2018
    Schlagwörter: Porous Materials

    Novel Engineering Methodology for Decoupled Aerothermal Analysis of Hypersonic Atmospheric Entry Flows

    Cooper, Justin M. / Martin, Alexandre | AIAA | 2023
    Schlagwörter: Ablative Materials

    Three-Dimensional Model for Erosion of a Hall-Effect Thruster Discharge Channel Wall

    Schinder, Aaron M. / Walker, Mitchell / Rimoli, Julian J. | AIAA | 2014
    Schlagwörter: Composite Materials

    Quantification of the Material’s Resistance to Damage by Lightning

    Kostogorova-Beller, Yulia / Diatchkovski, Fridrikh S. | AIAA | 2013
    Schlagwörter: American Society for Testing and Materials

    Two-Dimensional Orthotropic Plate Analysis for an Integral Thermal Protection System

    Martinez, Oscar / Sankar, Bhavani / Haftka, Raphael et al. | AIAA | 2012
    Schlagwörter: Mechanics of Materials

    Piezoelectric-Based Vibration Reduction of Turbomachinery Bladed Disks via Resonance Frequency Detuning

    Kauffman, Jeffrey L. / Lesieutre, George A. | AIAA | 2012
    Schlagwörter: Piezoelectric Materials

    Sampling by Exploration and Replication for Estimating Experimental Strength of Composite Structures

    Zhang, Yiming / Schutte, Jaco F. / Seneviratne, Waruna P. et al. | AIAA | 2017
    Schlagwörter: American Society for Testing and Materials

    Pocket Model for Aluminum Agglomeration Based on Propellant Microstructure

    Maggi, Filippo / DeLuca, Luigi T. / Bandera, Alessio | AIAA | 2015
    Schlagwörter: Energetic Materials

    Fracture in Phenolic Impregnated Carbon Ablator

    Agrawal, Parul / Chavez-Garcia, Jose F. / Pham, John | AIAA | 2013
    Schlagwörter: Porous Materials

    Effects of Shallow Biangle, Thin-Ply Laminates on Structural Performance of Composite Wings

    Kim, Yong Han Noel / Ko, Seunghyun / Lay, Wei-Siang et al. | AIAA | 2017
    Schlagwörter: American Society for Testing and Materials

    Establishing Standards for Lunar In Situ Resource Utilization Structural Materials

    Dyke, Shirley J. / Sharma, Akanshu / Mount, Eliza M. et al. | AIAA | 2024
    Schlagwörter: Strength of Materials

    Poro-Serrated Trailing-Edge Devices for Airfoil Self-Noise Reduction

    Vathylakis, Alexandros / Chong, Tze Pei / Joseph, Phillip F. | AIAA | 2015
    Schlagwörter: Porous Materials

    Fuzzy Optimal Controller Design with Application to Fuzzy Modeled Structures

    Rao, Singiresu S. / Liu, Qing | AIAA | 2008
    Schlagwörter: Composite Materials

    Experimental Investigation of Leak-Rate Performance of a Subscale Composite Elastomer-Retainer Docking Seal

    Garafolo, Nicholas G. / Daniels, Christopher C. | AIAA | 2013
    Schlagwörter: American Society for Testing and Materials

    Numerical Simulation of Melting in Porous Media via an Interfacial Tracking Model

    Chen, Qicheng / Yang, Mo / Zhang, Yuwen et al. | AIAA | 2011
    Schlagwörter: Phase Change Materials

    Temperature Range and Conjugate Effects in Microencapsulated Phase-Change Suspensions

    Cassidy, Daniel / Gould, Richard D. | AIAA | 2008
    Schlagwörter: Phase Change Materials

    Thermal Tomography Problem in Estimating the Unknown Interfacial Surface

    Huang, Cheng-Hung / Liu, Chia-Ying | AIAA | 2011
    Schlagwörter: Composite Materials

    Numerical Analysis of Heat Storage Phenomenon in a Dual Latent Heat Sink

    Kota, Krishna M. / Chow, Louis C. / Du, Jianhua et al. | AIAA | 2009
    Schlagwörter: Phase Change Materials

    Single-Sided Guarded Hot-Plate Method for Comparing Thermal Radiation Barriers in Vacuum

    Irick, Kevin W. / Hengeveld, Derek W. | AIAA | 2017
    Schlagwörter: American Society for Testing and Materials

    Flow-Tube Oxidation Experiments on the Carbon Preform of a Phenolic-Impregnated Carbon Ablator

    Panerai, Francesco / Martin, Alexandre / Mansour, Nagi N. et al. | AIAA | 2014
    Schlagwörter: Porous Materials

    Investigation of a Macromechanical Approach to Analyzing Triaxially-Braided Polymer Composites

    Goldberg, Robert K. / Blinzler, Brina J. / Binienda, Wieslaw K. | AIAA | 2011
    Schlagwörter: Mechanics of Materials

    Compression After Impact Experiments on Thin Face Sheet Honeycomb Core Sandwich Panels

    McQuigg, Thomas D. / Kapania, Rakesh K. / Scotti, Stephen J. et al. | AIAA | 2013
    Schlagwörter: American Society for Testing and Materials

    Extreme Ultraviolet Emission from Laser-Induced Plasma During Atomic Oxygen Tests

    Tagawa, Masahito / Kishida, Kazuhiro / Yokota, Kumiko et al. | AIAA | 2013
    Schlagwörter: Materials Testing

    Review of Calcium Sulfate as an Alternative Cause of Hot Corrosion

    Krisak, Matthew B. / Bentley, Brook I. / Phelps, Andrew W. et al. | AIAA | 2016
    Schlagwörter: American Society for Testing and Materials

    Improving Bond Strength at Propellant–Liner Interfaces

    Liao, Chih Yeh / Lee, Shyong | AIAA | 2015
    Schlagwörter: American Society for Testing and Materials

    Plasma-Induced Erosion on Ceramic Wall Structures in Hall-Effect Thrusters

    Burton, Thomas / Schinder, Aaron M. / Capuano, German et al. | AIAA | 2014
    Schlagwörter: Magnetic Materials

    Three-Dimensional Finite Element Ablative Thermal Response and Design of Thermal Protection Systems

    Dec, John A. / Braun, Robert D. | AIAA | 2013
    Schlagwörter: Ablative Materials

    Expendable High Energy Density Thermal Management Material: Ammonium Carbamate

    Schmidt, Joel E. / Dudis, Douglas S. / Miller, Douglas J. | AIAA | 2012
    Schlagwörter: Phase Change Materials

    Flow Control by Dynamic Vane Vortex Generators Based on Piezoceramic Actuators

    Barth, Thomas / Scholz, Peter / Weirach, Peter | AIAA | 2011
    Schlagwörter: Piezoelectric Materials

    Accounting for Finite Flash Duration in Diffusivity Experiments

    McMasters, Robert L. / Dinwiddie, Ralph B. | AIAA | 2010
    Schlagwörter: American Society for Testing and Materials

    Study on the Fracture Toughness of Hydroxyl-Terminated Polybutadiene Solid Rocket Propellant

    Zhou, Guangpan / Yin, Xiaochun / Li, Aiqun | AIAA | 2015
    Schlagwörter: American Society for Testing and Materials

    Error Estimation and Error Reduction in Separable Monte-Carlo Method

    Ravishankar, Bharani / Smarslok, Benjamin P. / Haftka, Raphael T. et al. | AIAA | 2010
    Schlagwörter: Strength of Materials

    Morphing Aircraft Systems: Historical Perspectives and Future Challenges

    Weisshaar, Terrence A. | AIAA | 2013
    Schlagwörter: Smart Materials Based Actuation

    Surface Modification of Space-Related Flat Cable Conductors by a Novel Technological Process

    Iskanderova, Zelina / Kleiman, Jacob / Grigorevski, A. et al. | AIAA | 2016
    Schlagwörter: American Society for Testing and Materials

    Novel Propulsion Systems for Micro Aerial Vehicles

    Lidor, A. / Weihs, D. / Sher, E. | AIAA | 2018
    Schlagwörter: Phase Change Materials