1–50 von 1,036 Ergebnissen
|

    METALCLAD RIGID AIRSHIP DEVELOPMENT1

    UPSON, RALPH H | SAE Technical Papers | 1926
    subject matter in the main paper and furnish food for discussion supplement the paper. This material is partially elementary in form as ...
    Verlag: Society of Automotive Engineers , SAE International

    Cooperation in Transport

    BEAUMONT, E. G. E. | SAE Technical Papers | 1928
    AMONG the manifold activities of the present age, the transport of men and materials of all kinds occupies, as it ever has, a predominant ...
    Verlag: Society of Automotive Engineers , SAE International

    The Automotive Body Engineer in AIRCRAFT

    WIDMAN, JOHN C. | SAE Technical Papers | 1942
    WHEN the automotive engineer enters the aircraft industry, he is confronted immediately with different engineering methods, with new and ...
    Verlag: Society of Automotive Engineers , SAE International

    Fluoroscopic X-Ray Inspection

    SAE Technical Papers | 1945
    , subject specification number and its title will be deleted from the active specification index of Aerospace Material Specifications. ...
    Verlag: Society of Automotive Engineers , SAE International

    High Temperature Alloys for the Gas Turbine - The State of the Art

    Sharp, W. H. | SAE Technical Papers | 1965
    advances in creep strength of turbine disc alloys and the significance of low cycle fatigue to new disc materials, and the recent developments in ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Coatings, colorants, and finishes

    The Chemical Industry's Role in Automotive Safety

    Winquist, M. E. / Rupprecht, W. E. F. | SAE Technical Papers | 1971
    , fire, and brake failure. The close cooperation of the automotive and chemical industries is duly credited for these safety efforts. Emphasis is ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Education and training , Roads and highways

    New Adhesive Needs and Concepts for the Aircraft and Aerospace Industries

    Reinhart, Theodore J. | SAE Technical Papers | 1972
    several new applications for structural adhesives.Adhesives have proved to be cheaper, lighter, and better performing than their riveted or spot ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Adhesives and sealants

    New Nondestructive Tests for the Automotive Industry

    McMaster, Robert C. | SAE Technical Papers | 1972
    New methods of nondestructive testing applicable to automotive industries include xeroradiography, a high-speed, low-cost method of x-ray ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Magnetic materials

    Connector Requirements and Technology

    Whitley, J. H. | SAE Technical Papers | 1974
    and for other industries will be applicable, if properly understood and utilized, in the automotive industry. But new, specific, and unique ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Connectors and terminals

    Personal automated transportation a pat solution for Australian cities

    Loder, J. L. | Taylor & Francis Verlag | 1974
    recommended as the best way of launching a new system to replace established (and familiar) alternatives. Reasons are given for the particular ...

    Automotive Design and Materials Selection

    Boyd, James | SAE Technical Papers | 1975
    Fantastic changes are taking place in our use of resources and in our life style. The industries that supply raw materials are being ...
    Verlag: Society of Automotive Engineers , SAE International

    Factors Affecting Plastic for High-Volume Exterior Automotive Applications

    Chmura, Louis J. | SAE Technical Papers | 1976
    outlook for increasing use of plastics on the exterior has never been more favorable due to a combination of factors within the automotive and ...
    Verlag: Society of Automotive Engineers , SAE International

    XMC ™ and HMC ™-Structural Molding Compounds

    Ackley, Richard H. | SAE Technical Papers | 1976
    materials offers the automotive manufacturers a much needed capability to remove weight from the American automobile. XMC™ is expected to be used in ...
    Verlag: Society of Automotive Engineers , SAE International

    Developing the Stirling engine for fuel economy in marine, industrial and medium duty automotive applications

    Carlqvist, S.G. / Rosenqvist, K.G. / Gemmesson, S.G. | Tema Archiv | 1977
    and medium duty automotive applications. A further step in the improvement of the efficiency is outlined. This second phase in the development ...

    Developing the Stirling engine for fuel economy in marine, industrial and medium duty automotive applications

    Carlquist, S.G. / Rosenquist, K.G. / Gummesson, S.G. | Tema Archiv | 1977
    and medium duty automotive applications. A further step in the improvement of the efficiency is outlined. This second phase in the development ...

    New Developments in Magnetic Suspension and Propulsion for Transportation

    Ross, J. A. / Holt, W. J. | SAE Technical Papers | 1977
    This paper describes the most recent accomplishments in the on-going development of the magnetically levitated and propelled ROMAG™ ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Magnetic materials

    Piston Rings for Passenger Car Engines

    Murray, Edward J. | SAE Technical Papers | 1979
    by careful attention to detail. Ring materials are included and the usefulness of carbidic malleable iron is demonstrated for top ring ...
    Verlag: Society of Automotive Engineers , SAE International

    Business Aircraft Turbofan Technology Progress in the 1970’s, Challenges in the 1980’s

    Wallace, F. B. | SAE Technical Papers | 1980
    in materials, aerodynamics, and acoustic technology are reviewed, including the Garrett/NASA Quiet Clean General Aviation Turbofan (QCGAT ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Business and general aviation aircraft , Alternative fuels

    Continuously Produced Steel Laminates Having Polymeric Cores

    Levine, Harold H. | SAE Technical Papers | 1981
    successfully used in the laboratory on a variety of metallic substrates, and this indicates that an entirely new family of material systems is ...
    Verlag: Society of Automotive Engineers , SAE International

    New Materials for lightweight Trucks

    Koske, Charles E. | SAE Technical Papers | 1982
    Many materials have emerged from the aerospace and defense industries that may have a significant impact on commercial vehicles in the ...
    Verlag: Society of Automotive Engineers , SAE International

    Developments in Sintered Valve Seat Inserts

    Lane, M. S. / Smith, P. | SAE Technical Papers | 1982
    based sintered alloy possessing excellent thermal conductivity for use in arduous applications including the new alternative fuels (natural gas ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Alternative fuels

    Fabric, Glass (181) (Chrome Treated)

    SAE Technical Papers | 1982
    specification is declared J/CANCELLED" by the Aerospace Materials Division, SAE, as of 1-1-82. By this acfflWP^Wfft^c^^pecification number and title ...
    Verlag: Society of Automotive Engineers , SAE International

    Hot forging of powder metal automotive parts

    Suh, S.K. | Tema Archiv | 1983
    Hot forging of powder metal preforms (P/M forging) is a process of growing interest and importance for the mass production of automotive ...

    Battery viability in automobile propulsion (system study)

    Severinsky, A. | Tema Archiv | 1983
    , describes several of the most energy dense batteries possible in a new combination of materials and construction, and compares those with other ...
    Schlagwörter: WERKSTOFF , MATERIAL

    The New London Taxicab-Comparison of R-RIM and Metal as Skin Panel Materials

    Lockhart, Grant M. | SAE Technical Papers | 1984
    low volume market. By means of simple comparison with alternative materials and methods, the rationale for the choice is developed, taking ...
    Verlag: Society of Automotive Engineers , SAE International

    Plastics Application from the Vehicle Designer's Point of View

    Germer, Alfred / Sorgatz, Ulrich | SAE Technical Papers | 1984
    application at a typical European mass production vehicle. This paper deals with the systematic approach to material selection and design of ...
    Verlag: Society of Automotive Engineers , SAE International

    Shot Peening and its Effect on Gearing

    Lawerenz, Mark D. | SAE Technical Papers | 1984
    means to a solution for these new design challenges that can only be made by having an understanding of this tool's capabilities. The ability to ...
    Verlag: Society of Automotive Engineers , SAE International

    A Historical Review of the Evolution of Farm Tractors, Earth moving Machines, and Concurrent Evolution of Safety and Operator Rollover Protection

    Jackson, W. C. | SAE Technical Papers | 1985
    displace the practice of adapting farm tractors. A whole new industry was created to meet the demand for immense construction and logging machines ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Agricultural vehicles and equipment , Materials handling

    Volvo LCP 2000 Light Component Project

    Mellde, Rolf | SAE Technical Papers | 1985
    technology and competence for the year 2000. In addition to broad theoretical know-how concerning new materials, alternative drive lines, new ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Starters and starting , Research and development

    Post Grind Hardening, an Alternative Method of Manufacturing a Steel Roller Camshaft

    Lusher, C. P. / Lengyel, J. S. / Giffune, J. W. et al. | SAE Technical Papers | 1986
    production The method utilizes a new forging technique and hardening the lobes of the camshaft after they are finish ground (post grind hardening). ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Coatings, colorants, and finishes

    Fluoropolymer Foam for Twisted Pair Cables

    Butkevich, Paul J. / Ringler, Robin L. | SAE Technical Papers | 1986
    industries are driven by the demand for more information and faster communications. The cable designer has the task of providing voice and data ...
    Verlag: Society of Automotive Engineers , SAE International

    Forecasting Farm Equipment Sales in a Declining Market

    Doster, D. H. / Krutz, Gary W. / Iwashita, M. | SAE Technical Papers | 1986
    government policies and also fiscal and monetary policies affect both the farmer's income and the associated agricultural industries ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Research and development , Tools and equipment

    Application of Basic Material Tests for Evaluating New Engineering Materials

    LINGENFELSER, D. J. | SAE Technical Papers | 1987
    the materials and minimize full-scale component testing by increased understanding of basic material properties. Axial fatigue and fracture ...
    Verlag: Society of Automotive Engineers , SAE International

    MRE Rotation Sensor: High-Accuracy, High-Sensitivity Magnetic Sensor for Automotive Use

    Ao, Kenichi / Kato, Mitsuharu / Mizutani, Shuji et al. | SAE Technical Papers | 1987
    device with high hybrid circuit density including an electric signal processing circuit.The new sensor is especially designed for generating a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Sensors and actuators , Magnetic materials

    Material Dependency on Optical Surface Roughness Measurements

    Ng, G. / North, W. | SAE Technical Papers | 1987
    Surface roughness measurement has been dominated by profilometers for years. The alternative optical methods offer advantages such as non ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Tools and equipment

    Trends in high speed machining

    Mitchell, W.A. | Tema Archiv | 1987
    and aerospace industries, High Speed Machining is now developing inroads into the automotive and electronics industries. This paper presents ...

    Accelerated corrosion testing: A cooperative effort by the automotive and steel industries

    Townsend, H.E. | Tema Archiv | 1988
    at commercial laboratories, designing new test cycles, and identifying suitable test materials and procedures. During 1988, four cyclic tests ...

    A materials selection tool for automotive structural and body skin systems

    Thurston, D.L. | Tema Archiv | 1988
    The traditional approach to materials selection is to compare the results of direct substitution of alternative materials on an individual ...

      A Materials Selection Tool for Automotive Structural and Body Skin Systems

      Thurston, Deborah L. | SAE Technical Papers | 1988
      The traditional approach to materials selection is to compare the results of direct substitution of alternative materials on an individual ...
      Verlag: Society of Automotive Engineers , SAE International
      Schlagwörter: Tools and equipment

    Prospects are bright for fiber glass composites. New materials are expected to help spur their market growth

    Tema Archiv | 1988
    auch in der Luft- und Raumfahrt-, der Bau-Industrie, im militaerischen Bereich und beim Schiffsbau werden Glasfaser-Verbundwerkstoffe in ...

    Design Data for Phenolic Engine Components

    Fitts, Bruce B. / Arimond, John | SAE Technical Papers | 1988
    of phenolics requires the integration of part design, processing and material selection, not simply the substitution of a new material into ...
    Verlag: Society of Automotive Engineers , SAE International

    Status of a Cooperative Effort by the Automotive and Steel Industries to Develop a Standard Accelerated Corrosion Test

    Townsend, H. E. | SAE Technical Papers | 1989
    A Task Force on Corrosion has been established by the Automotive Applications Committee of the American Iron and Steel Institute. The Task ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Coatings, colorants, and finishes

    Hoogovens’ Contribution to AISI Program “Accelerated Corrosion Testing: A Cooperative Effort by the Automotive and Steel Industries

    Soepenberg, Evert Nagel / Blekkenhorst, Frits | SAE Technical Papers | 1989
    In the framework of an extensive test program established by the Automotive Applications Committee of the American Iron and Steel Institute ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Coatings, colorants, and finishes

    The Use of Adhesion Promoters to Insure Reliable Bonding of Polypropylene and Other Polyolefinic Materials

    Cocco, John J. | SAE Technical Papers | 1989
    information that exemplifies the scope and benefits of this new assembly alternative. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Adhesives and sealants , Coatings, colorants, and finishes

    The pam-crash code as an efficient tool for crashworthiness simulation and design

    Haug, E. / Ulrich, D. | Tema Archiv | 1989
    successful car body crashworthiness simulations lead to a new partnership between test and analysis teams with the goal to reduce cost and delay of ...

    Use of Glass Reinforced Thermoplastic Composites for Performance and Design Flexibility

    Tomkinson-Walles, Gayle | SAE Technical Papers | 1989
    joint venture between GE Plastics and PPG Industries, AZDEL, Inc., has spawned new products as well as advances in processing and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Materials handling , Composite materials

    Squeeze forging - A near net shape technique for high strength applications

    Tietmann, A. / Baldner, K. / Kopp, R. | Tema Archiv | 1989
    force is the intent to save weight in the automotive and aircraft industries. The quality of the product depends largely on the manufacturing ...
    Schlagwörter: HOCHFESTER WERKSTOFF

    Evaluation of Environmentally Acceptable Refrigerant/Lubricant Mixtures for Refrigeration and Air Conditioning

    Pham, Hang T. / Thomas, Raymond H. P. | SAE Technical Papers | 1989
    depleting chemicals from the marketplace. The introduction of alternative fluids for various applications must be preceded by a significant amount ...
    Verlag: Society of Automotive Engineers , SAE International

    Plastics Disposal - What Are the Options

    Selke, Susan E. | SAE Technical Papers | 1989
    automobile recycling - the growing use of plastics in cars. There is a perception that articles made of plastics are not recyclable, and since they ...
    Verlag: Society of Automotive Engineers , SAE International

    Low-Dielectric Polyimides

    St. Clair, Anne K. / St. Clair, Terry L. / Winfree, William P. et al. | NTRS | 1989
    resistance to moisture. Useful as film and coating materials for both industrial and aerospace applications where high electrical insulation ...
    Verlag: NASA National Aeronautics and Space Administration
    Schlagwörter: Materials

    Lubrication Studies in a Methanol-Fueled Spark Ignition Engine

    Murphy, J. A. / Lohuls, J. R. / Buck, W. H. | SAE Technical Papers | 1989
    , natural gas, and/or organic biomass materials. In addition, methanol offers the potential for possibly reducing reactive vehicle hydrocarbon ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Alternative fuels