1–20 von 23 Ergebnissen
|

    The present and the future of line pipe steels for petroleum industry

    Das, A.K. | Tema Archiv | 2010
    specification for steel for pipelines introduced by the American Petroleum Institute (API) in 1948 was X 42 with yield strength of 42ksi or 290 MPa. The ...

    Management of the flow and processing of mining waste streams

    Sofra, F. / Boger, D. / Scales, P.J. | Tema Archiv | 2002
    Technological advancements in mineral processing have increased the feasibility of refining low-grade ores. Because of this progression and ...
    Verlag: Australasian Institute of Mining and Metallurgy , Carlton

    Simulation and formability of automotive aluminum alloy sheet and tube

    Worswick, M.J. / Orlov, O. / Winkler, S. | Tema Archiv | 2006
    This paper presents a review of research conducted at the University of Wateloo concerned with the application of aluminum alloy sheet and ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Current developments of the arc welding processes with shielding gases of aluminium and aluminium alloys

    Fortain, J.M. | Tema Archiv | 1999
    In order to comply with the technological evolution of the transportation industries (automotive, rail, shipbuilding, aircraft and ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    High temperature solutionizing and mechanical properties of the A356 aluminum casting alloy

    Takaai, T. / Nakayama, Y. / Ohnishi, N. et al. | Tema Archiv | 1996
    Experimental studies on high temperature solutionizing and related variations of the microstructures and mechanical properties of the A356 ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Perspectives of creation of the protective system with SM-elements for nuclear reactors

    Ionaitis, R.R. / Abramov, V.Y. / Tooktarov, M.A. et al. | Tema Archiv | 1999
    on the use of passive mechanisms, possibility to apply shape-memory (SM) alloys and devices manufactures on the basis of SM alloys. It is ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Laser weldability of C-Mn steels

    Russell, J.D. | Tema Archiv | 1999
    . However, the realization by the heavy fabrication industries of the true cost of distortion and fabrication inaccuracy has prompted many of them ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Advanced synthesis of light metals

    Froes, F.H. / Taylor, P.R. / Pirzada, S.A. et al. | Tema Archiv | 1995
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Challenges of robotic welding on aluminum automotive structures

    Broman, R.E. / Smith, C.B. / Noruk, J.S. et al. | Tema Archiv | 1999
    structures, if smart designs are combined with proper selection of the joining process. The joining processes covered in this discussion include Gas ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Recent advances in the development of ceramic stationary components for automotive CGT

    Watanabe, M. / Okano, H. | Tema Archiv | 1995
    introducing structural ceramics in future automotive engines and is being conducted by Petroleum Energy Center (PEC). In this program, monolithic ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Microgravity processing of fluorozirconate glasses to reduce devitrification during fibre drawing

    Varma, S. / Prasad, S.E. / Ahmad, A. et al. | Tema Archiv | 1993
    Fluorozirconate glasses are prone to devitrification during their processing on the ground. This is caused by homogeneous and heterogeneous ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Hydrogen generation through aluminum-assisted water split reaction

    Chaklader, A.C.D. / Troczynski, T. / Bapooji, V. et al. | Tema Archiv | 2003
    systems under investigation and commercial development, including sodium borohydride or other sodium compounds. The novelty of the proposed ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Corner cracking associated with the production of square tubing from low carbon ferritic stainless steel

    Simpson, N. / Van Rooyen, G.T. | Tema Archiv | 2003
    the high tensile residual stresses and a susceptible microstructure due to the presence of grain boundary carbides, can result in brittle ...

    Materials for PEM fuel-cell power systems for low-emission automobiles

    Amphlett, J.C. / Mann, R.F. / Mohareb, A.K. et al. | Tema Archiv | 2000
    less air pollutant and less carbon dioxide. The amount of reduction in emissions depends primarily on two system characteristics -- the source ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Welded aircraft: its past was dismal; its future is exciting

    Irving, R.R. | Tema Archiv | 1999
    rivets and by sophisticated fastening systems. Safety has been well established using that approach. However, some industrial segments of the ...
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    Magnesium's future in automotive components: Competing for the lightweight market in North America

    Loreth, M. / Morton, J. / Jacobson, K. et al. | Tema Archiv | 1995
    Verlag: Canadian Institute of Mining, Metallurgy and Petroleum , Montreal

    New approach to applicability of chemical methods for solving problems of hydrogen-based power engineering

    Azatjan, V.V. / Kozljakov, V.V. | Tema Archiv | 2003
    Academy of Science. As the sources of hydrogen, the production of chlorine, processing of petroleum and coal and metallurgy were taken into ...
    Schlagwörter: Petroleum

    Computational technique to predict the velocity and concentration profile for solidliquid slurry flow in pipelines

    Lahiri, S.K. / Ghanta, K.C. | Tema Archiv | 2007
    study for each project. The mechanisms of suspension flow are not yet completely understood and existing predictive models cover only some ...

    Control of scale deposit problems in slurry pipelines

    Gandhi, R.L. / Che, Y.G. / Watson, M.D. et al. | Tema Archiv | 2007
    removed from the wall, and the transport of that large volume could present operating difficulties for the owner. Provision for removal of large ...