121–140 von 401 Ergebnissen
|

    A Refined In-Flight Icing Model and its Numerical Implementation

    Hassler, Wolfgang | SAE Technical Papers | 2019
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat transfer , Heat treatment

    Minimizing Stress-Corrosion Cracking in Wrought High-Strength Aluminum Alloy Products

    SAE Technical Papers | 2019
    cracking (SCC) in wrought high-strength aluminum alloy products. ARP823F revises the title to include “high-strength” alloys and results from a ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment

    Chahal, Abhishek / Sundararajan, Devendiran / Raj, Devesh et al. | SAE Technical Papers | 2019
    , excellent mechanical properties, and good creep rupture strength at a higher temperature. Alloy 600 is used in heat treating, phenol condensers ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Insert - Screw Thread, Thin Wall, Self-Locking, UNS N07718, Silver Plated, Class: 185 ksi/1025 °F, Procurement Specification

    SAE Technical Papers | 2019
    and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. This revision ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat resistant alloys , Heat treatment , Heat resistant materials

    Improvement of Mechanical Properties, and Optimization of Process Parameters of AISI 1050 Spheriodized Annealed Steel by Ranking Algorithm

    Kumaran, Durai / Loganathan, Ganesh Babu / Saravanan, Krishnaswamy et al. | SAE Technical Papers | 2019
    accuracy are found while machining and less output in machining. In the present study of spherodizing heat treatment of AISI 1050 was investigated ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated

    SAE Technical Papers | 2018
    This specification covers a magnesium alloy in the form of sand castings. AMS4417C revises the title to correct the alloy designation ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged

    SAE Technical Papers | 2018
    of any size (see 8.6). AMS4134G introduces Exceptions (3.6), revises Title, Condition (3.2.1), Properties (3.3.1.3), and Reports (4.4), and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted, Solution Heat Treated

    SAE Technical Papers | 2018
    ). AMS6544E results from a Five-Year Review and update of this specification that revises the Title, corrects the UNS Number, revises composition ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr Ferrite Controlled, Annealed

    SAE Technical Papers | 2018
    This specification covers an aircraft-quality, corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment , Heat resistant materials

    Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat Treated

    SAE Technical Papers | 2018
    ), revises Title, Chemical analysis standards (3.1), Condition (3.2), Microstructure and Particle Homogeneity (3.7), Quality (3.8.1) and Reports ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable

    SAE Technical Papers | 2018
    forging or flash welded rings (see 8.7). AMS5773F revises Title, Composition (3.1), Solution Heat Treatment (3.4), Properties (3.5.2.2.1.2 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, Fine Grained

    SAE Technical Papers | 2018
    , with fine grain structure (see 8.5). AMS4276B revises Title, Condition (3.2), Properties (3.3.3), Reports (4.4.1) and Identification (5.1.1 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed, Fine Grained

    SAE Technical Papers | 2018
    , with a grain size of ASTM No. 6 or finer (see 8.5). AMS4277B revises Title, Condition (3.2), Properties (3.3.3), Reports (4.4.1) and ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed

    SAE Technical Papers | 2018
    thickness (see 8.5). AMS4015M revises Title, Properties (3.3.1.1), Reports (4.4.1) and Identification (5.1.1), and results from a Five-Year Review ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Hard Anodic Coating of Magnesium Alloys

    SAE Technical Papers | 2018
    update of this specification. Changes were made to the title differentiate AMS2466 from AMS2467 and to paragraph 3.4.3 Wear Resistance. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Extension and Validation of a 1D Model Applied to the Analysis of a Water Injected Turbocharged Spark Ignited Engine at High Loads and over a WLTP Driving Cycle

    Bozza, Fabio / Marchitto, Luca / Teodosio, Luigi et al. | SAE Technical Papers | 2017
    the water injection on the flame propagation speed and knock onset. The new features of the 1D model include an improved treatment of the heat ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed; or when specified, “As Fabricated” (2024-F)

    SAE Technical Papers | 2017
    the Title, Condition (3.2), Properties (3.3), Reports (4.4), and Identification (5.1.1), and results from a Five-Year Review and update of ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or when specified, “As Fabricated” (2219-F)

    SAE Technical Papers | 2017
    revises the Title to correct a temper designation, ANSI Accredited Publications (2.3), Response to Heat Treatment (3.3.2), Properties (3.3.3 ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)

    SAE Technical Papers | 2017
    (273.05 mm) and nominal weight of 0.253 lb/ft (0.38 kg/m) to 2.176 lb/ft (3.24 kg/m) (see 8.6). AMS4553D revises Title, Eddy Current Examination ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment

    Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems

    SAE Technical Papers | 2017
    AS5951SUP1, corrected wire material title, and clarified Sampling Test requirements for burst samples. ...
    Verlag: Society of Automotive Engineers , SAE International
    Schlagwörter: Heat treatment