Inconel 600 is a face-centered cubic structure and nickel-chromium alloy. Alloy 600 has good resistance to oxidation, corrosion-resistant, excellent mechanical properties, and good creep rupture strength at a higher temperature. Alloy 600 is used in heat treating, phenol condensers, chemical and food processing, soap manufacture, vegetable, and fatty acid vessels. In this context, the present paper investigates the machinability characteristics of Alloy 600 under dry environment. Also, the parametric effect of cutting speed, feed rate, and cutting depth on the force, surface roughness, and tool wear is carried out using 3-Dimensional surface and 1-Dimensional plots. The optimal parameters are determined systematically based on Taguchi-desirability analysis with turned with TiAlN coated carbide insert. From the graphical analysis of collected data, the low rate of feed and moderate cutting for roughness and cutting force and average feed rate for tool wear with low cutting depth. Probability test at 95% confidence reveals the residual of machining data falls reasonably on a straight line and can be taken for factor optimization. Variance test reveals that the cutting depth (68.34%) has the most substantial influence on responses. Optical examination shows abrasive wear, and adhesion is a tool to wear styles at investigated machining parameters. Chips geometries are found to be affected by feed rate and cutting depth that of cutting speed at the studied parameters.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Machinability and Parametric Optimization of Inconel 600 Using Taguchi-Desirability Analysis under Dry Environment


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2019



    Erscheinungsdatum :

    2019-10-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Machinability Investigations on Wire Electrical Discharge Machining of Inconel 625 by Taguchi Based Grey Approach

    Sagaya Raj, Gnana / Kotapati, Gowthami / Kiruthika, Jothi et al. | SAE Technical Papers | 2023



    Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function

    Panneerselvam, Vivekanandan / Turan, Faiz Mohd | Springer Verlag | 2020


    Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function

    Panneerselvam, Vivekanandan / Turan, Faiz Mohd | TIBKAT | 2021