In most aircraft overruns, an aircraft comes to a stop within 1,000 ft (305 m) of the runway threshold. In response, U.S. airfields are required by FAA to have a 1,000-ft runway safety area in addition to the design runway length in case of aircraft overruns. At airfields where space is limited, airport operators need to consider alternative solutions. One solution is for an airport operator to reduce runway length and therefore limit aircraft types landing at their airport. Conversely a more attractive solution is for an airport to implement an engineered material arrestor system (EMAS). An EMAS is a passive system comprising a cementitious type material. Aircraft deceleration occurs because of drag forces that are incurred by the aircraft landing gear as the aircraft passes through and crushes the arrestor material. Parameters significantly influencing a B727 or B747 aircraft's stopping distance as it traverses an EMAS are presented. The computer code, ARRESTOR, developed for FAA, was used to compute the aircraft stopping distances. Five aircraft parameters (mass moment of inertia, weight, wheel friction, reverse thrust, and center of gravity location) for each aircraft type are examined, along with two arrestor material types (low-density concrete and phenolic foam) and three arrestor bed geometries. Each parameter is individually varied to investigate stopping distance sensitivity. Twenty-one overrun simulations were used in the aircraft parameter study, and 100 overrun simulations were used to determine an optimal material compressive strength. Arrestor bed geometry was investigated by using 32 overrun simulations. Study results are summarized in plots and tables.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Sensitivity Analysis of Engineered Material Arrestor Systems to Aircraft and Arrestor Material Characteristics


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:


    Erscheinungsdatum :

    01.01.2008




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Engineered material arrestor system

    WEBBER DANIEL / BJORNSTAD JAMI / BOGNACKI CASIMIR JOSEPH et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Engineered Material Arrestor System

    WEBBER DANIEL / BJORNSTAD JAMI / BERNACKI CASIMIR JOSEPH et al. | Europäisches Patentamt | 2017

    Freier Zugriff

    Numerical Simulation of Engineered Material Arrestor System (EMAS)

    Amirhossein Akbarikermani / Farzin Kalantary | DOAJ | 2024

    Freier Zugriff