Full-scale field tests were conducted on two 8.5-m (28-ft) span reinforced concrete arch culverts. The culverts were subjected to service live loads at depths of cover from 0.3 to 0.9 m (1 to 3 ft). At 1 ft of fill, the culverts were loaded with a simulated single-axle live load greater than 980 kN (220,000 lb). Field data collected included arch deflection, interface pressure, concrete strain, and reinforcing strain. The computer modeling of the live-load tests is reported. Two- and three-dimensional finiteelement analyses were conducted. Nonlinear material models were used for the backfill soil and the reinforced concrete in both the two- and three-dimensional analyses. Results from the finite-element analyses are compared with the field test data. Results of this study indicate that the two-dimensional models are limited in their ability to predict the longitudinal spreading of live load forces in the culverts and to predict maximum moments larger than those in the actual structure. The three-dimensional finite-element deflection predictions were dependent on the properties used to define the concrete material model; however, the design forces (moment, thrust, and shear) did not show the same sensitivity. This indicates that for typical structural design, material parameters may be approximated without seriously degrading the accuracy of predicted design forces. The test structures met AASHTO design criteria for strength and serviceability.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Finite-Element Modeling of Reinforced Concrete Arch Under Live Load


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:


    Erscheinungsdatum :

    01.01.2002




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Live Load Distribution Widths for Reinforced Concrete Box Sections

    McGrath, Timothy / Liepins, Atis / Beaver, Jesse | Transportation Research Record | 2005


    Finite-Element Modeling and Analysis of Reinforced Concrete Box Culverts

    Garg, A.K. / Abolmaali, A. | British Library Online Contents | 2009



    Numerical Load Rating of Reinforced Concrete Compression Members: Demonstration with Connecticut Arch Bridges

    Ranasinghe, Arjuna P. / Gottshall, Wendy L. | Transportation Research Record | 2002