There are several methods for determining the stiffness of asphalt concrete in an existing pavement. The three primary methods are: dynamic modulus testing in the laboratory, predictive equations, and falling weight deflectometer (FWD) testing. Asphalt over asphalt (AC/AC) overlay design procedures allow the use of multiple methods to characterize fatigue damage in the existing asphalt concrete. Therefore, understanding the difference between these methods is critical for AC/AC overlay design. The differences between the methods for determining asphalt concrete stiffness and how these differences are related to FWD load magnitude and asphalt temperature are examined. Data from the Federal Highway Administration’s Long-Term Pavement Performance Program (LTPP) are used in this investigation. It is found that the stiffness determined through FWD testing and backcalculation is generally less than that estimated using the Witczak predictive equation and binder aging models. Furthermore, it is found that both FWD load magnitude and asphalt temperature have a significant effect on the difference between backcalculated and estimated stiffness of asphalt concrete. Backcalculated stiffness increases relative to estimated stiffness as FWD load and temperature increase. These effects must be considered when multiple methods of determining asphalt concrete stiffness are used interchangeably for overlay design.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Relationship between Backcalculated and Estimated Asphalt Concrete Dynamic Modulus with Respect to Falling Weight Deflectometer Load and Temperature


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:


    Erscheinungsdatum :

    07.07.2020




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Validation of Backcalculated Modulus Values from Falling Weight Deflectometer through Instrumentation on I-35 in Oklahoma

    Solanki, Pranshoo / Zaman, Musharraf M. / Muraleetharan, Kanthasamy K. | Transportation Research Record | 2011



    Backcalculation of Asphalt Concrete Modulus Master Curve from Field-Measured Falling Weight Deflectometer Data

    Zaabar, Imen / Chatti, Karim / Lee, Hyung Suk et al. | Transportation Research Record | 2014


    Backcalculation of Dynamic Modulus Mastercurve from Falling Weight Deflectometer Surface Deflections

    Kutay, M. Emin / Chatti, Karim / Lei, Ligang | Transportation Research Record | 2011