This paper presents the results of the first study to evaluate the effects of the tack coat and micro-surfacing mix properties on the interlayer bond strength between the micro-surfacing layer(s) and existing pavement surface. Several factors were investigated, which included the type of tack coat material, tack coat application rate, and the residual binder content of the micro-surfacing mix. To this end, a total of 14 field micro-surfacing test sections were installed on Ohio State Route 03 in Wayne County, Ohio. While the first seven sections were constructed with a single micro-surfacing layer, the other seven sections had double micro-surfacing layers. Five tack coat application rates and two residual binder contents were evaluated. The testing plan involved obtaining core samples from the constructed sections 1 week, 4 months, and 12 months after construction. The obtained field cores were tested in the laboratory using two types of pull-off tests and a torque bond strength test. The results of bond strength tests on obtained field cores and the statistical analysis performed on these results indicated that sections with no tack coat had significantly lower bond strength than those with tack coat with at least 0.05 gallons per square yard (gsy) total application (0.0083 gsy residual application rate). Furthermore, results indicated that the use of 0.75% lower residual asphalt binder content in micro-surfacing mixes resulted in significantly lower bond strength between the micro-surfacing and existing pavement. The tack coat material properties had some effect on the interlayer bond strength; however, this effect was statistically insignificant.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluation of the Interlayer Bond Strength of Micro-Surfacing Mixes


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:
    Al-Hosainat, Ahmad (Autor:in) / Nazzal, Munir D. (Autor:in) / Abu Talha, Sk (Autor:in) / Kim, Sang-Soo (Autor:in) / Abbas, Ala (Autor:in) / Mohammad, Louay (Autor:in) / Biehl, Eric (Autor:in) / Ricciardi, Perry (Autor:in)


    Erscheinungsdatum :

    07.07.2022




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    DEVELOPMENT OF EMULSIONS FOR MICRO-SURFACING

    Permanent International Association of Road Congresses | British Library Conference Proceedings | 2004


    Evaluation of the use of steel slag in micro surfacing

    Pedro Bastos de Castro / Bruno Tiago Angelo da Silva / Suelly Helena de Araújo Barroso | DOAJ | 2020

    Freier Zugriff

    Simple Strength Testing for Superpave Mixes

    Collins, R. | British Library Conference Proceedings | 1998


    An Experimental Study on Assessment of Pavement Interlayer Bond Strength

    Mahabir Panda / Bidyut Sutradhar / Jyoti Giri et al. | DOAJ | 2013

    Freier Zugriff

    Evaluation of reliability surfacing

    V.V. Аrtemchuk / N.A. Mukhina | DOAJ | 2012

    Freier Zugriff