The objective of this project was to develop a model that describes design speed profiles of vehicles traversing horizontal curves on approaches to stop-controlled intersections on two-lane two-way rural highways. Once speed prediction models were determined, a procedure for the design of horizontal curves that would accommodate vehicles transitioning from high speeds to a stop was developed. Speed profiles were developed with the use of data from 15 study sites in Nebraska. The multiplicative model was used to provide prediction equations for speed profiles. Separate profiles were created for passenger cars and heavy vehicles because speeds were significantly different. The heavy vehicle data were separated further for alignments with and without horizontal curvature. It was concluded that posted speed, median type, presence of rumble bars, roadway surface condition, and degree of rutting did not significantly affect the vehicle speed profiles at these sites at a 95% confidence level. During the comparison of speeds, it was found that the intercepts of the regression lines for approaches with and without horizontal curves were significantly different in the case of heavy vehicles. The speed of heavy vehicles on tangent approaches was generally about 8 mph higher than on sites that exhibited horizontal curvature. The rate of deceleration remained almost the same on all approaches to intersections, except near the stop. For passenger cars, there was no statistically significant difference between curved and tangent alignments. A guidebook for the geometric design of intersection realignment Methods A through D, referred to in the 2004 Green Book, is also included in the project's report.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Predicted 95th Percentile Speeds on Curved Alignments Approaching a Stop


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:
    Schurr, Karen S. (Autor:in) / Spargo, Benjamin W. (Autor:in) / Huff, Ryan R. (Autor:in) / Pesti, Geza (Autor:in)


    Erscheinungsdatum :

    01.01.2005




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Predicted 95th Percentile Speeds on Curved Alignments Approaching a Stop

    Schurr, Karen / Spargo, Benjamin / Huff, Ryan et al. | Transportation Research Record | 2005


    Predicted 95th-Percentile Speeds on Curved Alignments Approaching a Stop

    National Research Council (U.S.) | British Library Conference Proceedings | 2005


    HUMOS (Human Model for Safety) Geometry: From One Specimen to the 5th and 95th Percentile

    Brunet, C. / Mitton, D. / Verriest, J. P. et al. | SAE Technical Papers | 2006


    Application of Radial Basis Function Methods in the Development of a 95th Percentile Male Seated FEA Model

    Weaver, Ashley A. / Gayzik, F. Scott / Stitzel, Joel D. et al. | SAE Technical Papers | 2014