For cast-in-place abutments and retaining walls, structural backfill is preferred to be free-draining, which generally implies less than 5% fines content. This fines content is expected to eliminate the need to design for hydrostatic pressures. The availability of high-quality structural backfill with naturally low fines content is declining. This situation warrants an evaluation of whether granular backfill materials with greater than 5% fines content could be successfully used in practice. Flexible wall, hydraulic conductivity tests on a granular structural backfill with 0%, 5%, 10%, 15%, 20%, and 25% nonplastic fines content were conducted at 41, 83, and 124 kPa (6, 12, and 18 psi) confining pressures followed by consolidated drained triaxial compression tests for obtaining associated drained shear strength parameters of these gradations. The 15.2-cm (6-in.) diameter specimens were prepared at optimum moisture content and 95% of maximum standard Proctor density. To enable a comparison with respect to modified Proctor maximum densities, modified Proctor tests were also performed for all base soil–fines content mixtures. The experimental results were compared with relevant studies found in the literature. This research indicates that a nonplastic fines content up to 10% may be justified in structural backfill specifications for retaining walls and abutments.
Effects of Fines Content on Hydraulic Conductivity and Shear Strength of Granular Structural Backfill
Transportation Research Record
2014-01-01
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Effects of Particle Size and Fines Content on Thermal Conductivity of Quartz Sands
Transportation Research Record | 2019
|Shear Strength and Compressibility of Tire Chips for Use as Retaining Wall Backfill
Online Contents | 1993
|Steady-State Strength, Relative Density, and Fines Content Relationship for Sands
Online Contents | 1996
|Steady-State Strength, Relative Density, and Fines Content Relationship for Sands
Transportation Research Record | 1996
|