A series of centrifuge model tests was conducted to measure the ultimate horizontal bearing capacity of suction piles. Three different pile lengths were tested in sand. Model piles were laterally loaded at different points along the pile length to evaluate the effect of the loading depth on the ultimate horizontal bearing capacity of suction piles. Two tests were conducted for each loading point. Results from centrifuge model tests were then compared with the analytical predictions to determine the validity of the analytical solution in predicting the ultimate horizontal bearing capacity of rigid suction piles loaded at various depths. Predicted values from the analytical solution compared well with the measured values from the centrifuge model tests.
Horizontal Bearing Capacity of Suction Piles in Sand
Transportation Research Record
Transportation Research Record: Journal of the Transportation Research Board ; 1975 , 1 ; 21-27
2006-01-01
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Horizontal Bearing Capacity of Suction Piles in Sand
Transportation Research Record | 2006
|Online Contents | 2004
On the bearing capacity of suction bucket foundation in saturated sand
Tema Archiv | 2005
|