Causes are analyzed to the three shelling failures of railway 353130B type of roller bearings on China 70t grade of freight cars with K5 type of tilting bogie. These bearings are all failed in service lives less than two years, which is quit less than the overhaul inspection interval of 800, 000 km mileage of vehicles and the design life of 2, 000, 000 km mileage. The failures are all originated from the position at the outer ring inboard side nearly to the seal seat. Metallurgical observations reveal that the material chemical composition and microstructures are all in the reasonable range except for the hardness values. This implies that the manufacturing techniques may not match the requirements to lead to the reduction of fatigue strength. Elastic-plastic finite element (EPFE) analysis reveals that the position at the outer ring inboard side nearly to the seal seat is subjected to the maximum equivalent stress amplitude, which well match the situations of failures. In addition, a comparison is made to the bearing on the same axle weight freight cars But K6 type of bogie. Results reveal the maximum stress amplitude for K5 type of bogie is larger than that for K6 type of bogie. This means the bearings failures are relative to the local structures. Therefore, both the manufacturing techniques and the bogie structures should be advanced to improve the bearing service lives.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Fatigue Failures of the 353130B Type Roller Bearings on China Railway Freight Cars


    Beteiligte:

    Erschienen in:

    Erscheinungsdatum :

    12.06.2008


    Format / Umfang :

    6 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Roller bearings on railway cars

    Sanders, W.C. | Engineering Index Backfile | 1927


    Roller bearings for locomotives and freight cars

    Buckwalter, T.V. | Engineering Index Backfile | 1930


    Roller bearings on Swedish Railway Cars

    Nothin, E. | Engineering Index Backfile | 1930


    How roller bearings are applied to freight cars

    Engineering Index Backfile | 1954


    Standardization of journal boxes with roller bearings for railway cars

    Wikander, O.R. | Engineering Index Backfile | 1924