Stress state transducers (SSTs) were used to determine the orientation of the major principal stress, sigma1, in soil beneath the centerline of an 18.4R38 radial-ply R-1 drive tire operated at 10 % slip. Two soils, a sandy loam and a clay loam, were each prepared twice to obtain two density profiles. One profile of each soil had a hardpan and the soil above the hardpan was loose. The soil in the second profile was loosely tilled. The stress state was determined at a depth of 358 mm in the sandy loam and 241 mm in the clay loam soil. The tire was operated at two dynamic loads (13.2 and 25.3 kN), each at two levels of inflation pressure (41 and 124 kPa). When the orientation of sigma1 was determined directly beneath the axle, the mean angles of tilt in the direction of travel ranged from 6 to 23 degrees from vertical. Inflation pressure did not significantly affect the angle when the dynamic load was 13.2 kN in the sandy loam soil, and neither inflation pressure nor dynamic load significantly affected the angle in the clay loam soil. When the dynamic load was 25.3 kN in the sandy loam soil, the orientation of the major principal stress determined directly beneath the axle was tilted significantly more in the direction of travel when the tire was at 41 kPa inflation pressure than when at 124 kPa. These changes in stress orientation demonstrate the importance of measuring the complete stress state in soil, rather than stresses along only one line of action. The changing orientation of sigma1 as the tire passes over the soil indicates the soil undergoes kneading and supports future investigation of the contribution of changes in stress orientation to soil compaction.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Soil stress state orientation beneath a tire at various loads and inflation pressures


    Weitere Titelangaben:

    Verteilung der Reifenbeanspruchung auf schmutzigen Fahrbahnen bei verschiedener Belastung und unterschiedlichem Reifenluftdruck


    Beteiligte:
    Way, T.R. (Autor:in) / Johnson, C.E. (Autor:in) / Bialey, A.C. (Autor:in) / Raper, R.L. (Autor:in) / Burt, E.C. (Autor:in)

    Erschienen in:

    Journal of Terramechanics ; 33 , 4 ; 185-194


    Erscheinungsdatum :

    1996


    Format / Umfang :

    10 Seiten, 9 Bilder, 3 Tabellen, 12 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch





    Soil stress state orientation beneath a tire at various loads and inflation pressures

    Way,T.R. / Johnson,C.E. / Bailey,A.C. et al. | Kraftfahrwesen | 1996


    Soil stresses under a tractor tire at various loads and inflation pressures

    Bailey, A.C. / Raper, R.L. / Way, T.R. et al. | Tema Archiv | 1996


    Soil stresses under a tractor tire at various loads and inflation pressures

    Bailey,A.C. / Paper,R.L. / Way,T.R. et al. | Kraftfahrwesen | 1996


    Soil Stresses Under Tractor Tires at Various Inflation Pressures

    Bailey, A. C. / Raper, R. L. / Way, T. R. et al. | British Library Conference Proceedings | 1993