This paper reports the design and construction of a prototype cycle frame intended for sprint racing. Initially, the bicycle was conceived as a 'one off'. Moreover, the work was undertaken in the context of an undergraduate student project, so that very little funding was available for tooling. It was decided, therefore, to manufacture the frame by hand lay up a foame core. This is necessarily a laborious process requiring hand finishing, but is a low risk route, allowing continual monitoring of quality. Wet lay up (dry fabric and liquid resin) was used, and vaccum bag processing gave good laminate consolidation. Aluminium bottom bracket shell and rear drop-outs, and carbon fibre tubes for the head tube and seat tube, were bonded to the foam core and integrally laminated in the frame. The finish frame was subjected to a series of static tests to verify its stiffness. These included vertical compliance, seat tube bending and overall torsional stiffness. The results were 'benchmarked' against two commercial frames and found to be of satisfactory performance. A detailed finite element model was under development at the time of writing this paper. A complete bicycle was assembled and raced by a member of the National Team of Greece in the 1994 World Championships. The rider succeeded in setting a new national record in the sprint event. Since then a number of bikes made for riders of national teams of Greece, Italy, Russia, Estonia and Latvia.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design and prototype manufacture of a composite bicycle frame


    Weitere Titelangaben:

    Entwicklung und Herstellung eines Fahrradrahmenprototyps aus Verbundwerkstoffen


    Beteiligte:
    Katsanis, D. (Autor:in) / Grove, S.M. (Autor:in)


    Erscheinungsdatum :

    1996


    Format / Umfang :

    5 Seiten, 4 Bilder, 13 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Bicycle, bicycle frame thereof, bicycle frame production method and composite pipe fitting connecting structure

    LIU JING / LI YUEQIANG / LIU YUHAN et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    BICYCLE FRAME COMPONENT, BICYCLE FRAME AND BICYCLE

    TOMPSON TOM ROBERT DZHORDZH | Europäisches Patentamt | 2018

    Freier Zugriff

    ARRANGEMENT FOR A BICYCLE FRAME AND METHOD OF MANUFACTURE

    KOKKONEN LEO | Europäisches Patentamt | 2022

    Freier Zugriff

    ARRANGEMENT FOR A BICYCLE FRAME AND METHOD OF MANUFACTURE

    KOKKONEN LEO | Europäisches Patentamt | 2022

    Freier Zugriff

    ARRANGEMENT FOR A BICYCLE FRAME AND METHOD OF MANUFACTURE

    KOKKONEN LEO | Europäisches Patentamt | 2020

    Freier Zugriff