The use of ceramic material in diesel engines would be advantageous for many reasons: Insulation of the parts, incorporated in the combustion chamber, reduction of the oscillating masses, increase of the combustion temperature and an increased theoretical efficiency. For this purpose the geometry of the CMC parts has to be optimised and then to be tested in a diesel engine. Therefore many variants with different geometries were evaluated using teh FE analysis to choose the adequate design. Firstly the properties of the material composed of SiC fibers and a SiC matrix were evaluated. Uniaxial specimen tests with a special test control yielded the typical stress-strain curve for this material, necessary for calculations. Initially the assembly method for the cylinder liner, the piston insert and the cylinder head insert was examined. For the determination of the temperature induced stresses the orthotropic and temperature properties of the material were considered. For the stress analyses the contact behaviour of the parts was simulated by the use of gap elements. The operational conditons inlcude beside thermal loads, the preload of the bolts and the piston insert and the pressure load, which arise during he combustion process. Thus the assembly method of the ceramic parts for the diesel engine was determined and a full scale version of the diesel engine was choosen. Finally the most promissing CMC variants were manufactured and tested in the diesel engine. Partly due to severe changes of the combustion process, the life of the CMC components was too short for the complete realisation in diesel engines. Many details, first of all the material itself, have to be improved in order to achieve successful results in the future.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Analysis and testing of ceramic matrix composites in diesel engines


    Weitere Titelangaben:

    Analyse und Untersuchung von Verbundwerkstoffen in Dieselmotoren


    Beteiligte:
    Sygulla, D. (Autor:in) / Agatonovic, P. (Autor:in)


    Erscheinungsdatum :

    1992


    Format / Umfang :

    9 Seiten, 8 Bilder, 1 Tabelle, 4 Quellen


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Analysis and testing of ceramic matrix composites in diesel engines

    Sygulla,D. / Agatonovic,P. / MAN Technology,Strength Dep.,Muenchen,DE | Kraftfahrwesen | 1991


    Ceramic Matrix Composites: Applications in Pistons for Diesel Engines

    Bruni, L. / Rhodes, M. P. L. / Associazione Tecnica dell' Automobile | British Library Conference Proceedings | 1989



    Transient Testing of Diesel Engines

    Clark,C.A. / M.P. / Challen,B.J. et al. | Kraftfahrwesen | 1984


    Transient Testing of Diesel Engines

    Challen, B.J. / Clark, C.A. / May, M.P. | SAE Technical Papers | 1984