Strain rate sensitivity is an important material property in the formability of sheet metal. In this study, strain rate sensitivity is evaluated for several different grades of stel. Strain rate sensitivity varies from 0.01 to 0.022 for the steels tested. It was found that formable steels such as IF and AKDQ steels have both high n-value (strain hardening) and m-value (strain rate sensitivity). Positive strain rate sensitivity results in a significant increase in the yield strength and tensile strength at higher strain rates. The n-value decreases with strain rate for all of the steels. The total elongation decreases slightly with strain rate for the lower strength steels but is constant or even increases lightly with strain rate for high strength steels. For a typcial AKDQ steel, the increase in yield strength can be as high as 43 % for an increase in strain rate from 0.002/s to 2.0/s. The yield strength at high strain rates can be calculated based on the yield strength at low strain rates and the strain rate ratio of the high strain rate to the low strain rate.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Strain rate sensitivity of automotive steels


    Weitere Titelangaben:

    Empfindlichkeit gegen Umformgeschwindigkeit bei Stählen für den Kraftfahrzeugbau


    Beteiligte:
    Shi, M.F. (Autor:in) / Meuleman, D.J. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    1992


    Format / Umfang :

    10 Seiten, 6 Bilder, 4 Tabellen, 32 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Strain Rate Sensitivity of Automotive Steels

    Meuleman, David J. / Shi, Ming F. | SAE Technical Papers | 1992


    Strain rate sensitivity of automotive steels

    Shi,M.F. / Meuleman,D.J. / National Steel,US | Kraftfahrwesen | 1992


    Assessment of the Strain-Rate Dependent Tensile Properties of Automotive Sheet Steels

    De, Amar K. / Matlock, David K. / Bruce, Denise M. et al. | SAE Technical Papers | 2004


    High strain rate deformation of high strength sheet steels for automotive parts

    Miura,K. / Takagi,S. / Hira,T. et al. | Kraftfahrwesen | 1998


    High Strain Rate Deformation of High Strength Sheet Steels for Automotive Parts

    Miura, K. / Furukimi, O. / Takagi, S. et al. | SAE Technical Papers | 1998