The laser sheet flow visualization technique has been applied to the visualization of a periodic rotor wake from a rotorcraft in forward flight. A stiff, two-bladed teetering rotor is mounted independently of an idealized airframe which is a circular cylinder with a hemispherical nose. The model was installed in a wind tunnel and tests were carried out at three different advance ratios (forward flight speeds) at one value of rotor collective pitch angle. The laser sheet technique enables detailed flow visualization with relative simplicity. Quantitative data regarding the location of the rotor tip vortex can be obtained with satisfactory accuracy. Results from the flow visualization confirm that the rotor wake is a complex flowfield not amenable to simple analysis. However, the details of the tip vortex geometry are both periodic and repeatable. The motion of the rotor wake in close proximity to the airframe was examined. The behavior of the tip vortex is strongly affected by the presence of the airframe. In particular, the interaction of the rotor tip vortex with the airframe results in the destruction of the vortex core; apparently the vorticity is diffused and the vortex loses its definition. No vortex filaments appear below the airframe as identifiable flow features. Examples of airframe surface pressure data are presented and are seen to correlate well with the results from flow visualization.
Results from laser sheet visualization of a periodic rotor wake
Ergebnisse der Untersuchung der mit Lasertechnik sichtbar gemachten periodischen Stroemung hinter dem Rotor
AIAA-Papers ; Jan ; 1-7
1988
7 Seiten, 12 Bilder, 2 Quellen
Aufsatz (Konferenz)
Englisch
Visualization of a helicopter rotor wake in hover
AIAA | 1999
|Direct periodic solutions of rotor free wake calculations
Tema Archiv | 1993
|