NASA is seeking to reduce the mass, size, consumed power, and cost of the instrumentation used in its future missions. An important element of many instruments and devices is the actuation mechanism and electroactive polymers (EAP) are offering an effective alternative to current actuators. In this study, two families of EAP materials were investigated, including bending ionomers and longitudinal electrostatically driven elastomers. These materials were demonstrated to effectively actuate manipulation devices and their performance is being enhanced in this on-going study. The recent observations are reported in this paper, include the operation of the bending-EAP at conditions that exceed the harsh environment on Mars, and identify the obstacles that its properties and characteristics are posing to using them as actuators. Analysis of the electrical characteristics of the ionomer EAP showed that it is a current driven material rather than voltage driven and the conductivity distribution on the surface of the material greatly influences the bending performance. An accurate equivalent circuit modeling of the ionomer EAP performance is essential for the design of effective drive electronics. The ionomer main limitations are the fact that it needs to be moist continuously and the process of electrolysis that takes place during activation. An effective coating technique using a sprayed polymer was developed extending its operation in air from a few minutes to about four months. The coating technique effectively forms the equivalent of a skin to protect the moisture content of the ionomer. In parallel to the development of the bending EAP, the development of computer control of actuated longitudinal EAP has been pursued. An EAP driven miniature robotic arm was constructed and it is controlled by a MATLAB code to drop and lift the arm and close and open EAP fingers of a 4-finger gripper.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Electro-active polymer (EAP) actuators for planetary applications


    Beteiligte:
    Bar-Cohen, Y. (Autor:in) / Leary, S. (Autor:in) / Shahinpoor, M. (Autor:in) / Harrison, J.O. (Autor:in) / Smith, J. (Autor:in)


    Erscheinungsdatum :

    1999


    Format / Umfang :

    7 Seiten, 18 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Electro-Active Polymer (EAP) Actuators for Planetary Application

    Smith, J. / Harrison, J. / Shahinpoor, M. et al. | NTRS | 1999


    ELECTRO-ACTIVE POLYMER ACTUATORS FOR VEHICLE SEATING APPLICATIONS

    HULWAY MICHAEL | Europäisches Patentamt | 2015

    Freier Zugriff

    Electro-active polymer actuators for vehicle seating applications

    HULWAY MICHAEL | Europäisches Patentamt | 2016

    Freier Zugriff

    Electroactive Polymer (EAP) Actuators for Planetary Applications

    Bar-Cohen, Y. / Leary, S. / Shahinpoor, M. et al. | NTRS | 1999


    ELECTRO-ACTIVE POLYMER ACTUATORS FOR A VEHICLE

    KHULVEJ MAJKL | Europäisches Patentamt | 2019

    Freier Zugriff