Draper Laboratory and Boeing North American have formed an alliance to develop very small, low-cost rate sensors for commercial and military applications. Several generation of micro-mechanical gyroscopes have been developed at Draper, using a dissolved wafer process that features single crystal Si anodically bonded to a glass substrate. Resulting sensor die size is approximately 1 mm. When integrated with applications specific integrated circuits (ASIC's), the sensor fits in a 3 cm per side flat pack operating from a single 5V dc supply. Bias stability over temperature ranges of 0.5 degrees C has surpassed 10 degrees /hr. Best to date resolution and angle random walk performance is 25 degrees /hr in 60 Hz and 0.04 degrees / square root h respectively. The sensors are extremely robust, having survived air guns tests in excess of 60,000 g's. This technology is useful for spacecraft inertial guidance. Size, mass, and power of inertial systems can be reduced by orders of magnitude, providing benefits of paramount importance to the new class of miniature satellites, revers, and spacecraft. However, significant challenges remain before this technology is routinely available for space applications related to performance and space environmental effects. This paper discusses the principle of operation, measured and projected performance, and approaches being taken at Draper Laboratory to develop micromechanical instruments suitable for use in military and space systems.
Microelectromechanical instrument and systems development at the Charles Stark Draper Laboratory, Inc
1997
1 Seite, 7 Quellen
Aufsatz (Konferenz)
Englisch
British Library Conference Proceedings | 1997
|In Memoriam-Charles Stark Draper
AIAA | 1988
|Draper Laboratory small autonomous aerial vehicle
SPIE | 1997
|