The electrical and optical performance of 2.7 mil thick, 8 cm*8 cm silicon wrapthrough solar cells is described. These cells are desirable for spacecraft requiring lightweight, radiation resistant cells. Modeling of the radiation stability of BSF (back surface field) cells indicates that 80% of the power is retained after exposure to 6*1014 1 MeV electrons/cm2. Modeling performed on the beginning-of-life performance yields an ideal efficiency of 14% for the BSF and 14.7% for the BSFR (back surface field with reflector) cells. The best BSF and BSFR cell efficiencies measured are 13.7% and 14.1%, respectively, at AM0 28 degrees C. It is shown that the difference between the ideal and actual performances is due to series resistance and a higher than expected back surface recombination velocity.
Development of 2.7 mil BSF and BSFR silicon wrapthrough solar cells
Entwicklung von 2,7 mil BSF und BSFR Silizium-Wrapthrough-Solarzellen
1990
5 Seiten, 3 Quellen
Aufsatz (Konferenz)
Englisch
Process development of amorphous silicon-crystalline silicon solar cells
Online Contents | 1997
|Online Contents | 1996
|Development of both-side junction silicon space solar cells
Online Contents | 2001
|Crystalline silicon solar cells
TIBKAT | 1998
|Online Contents | 2009
|