The EMET projectile uses joule heating to accelerate the projectile in a railgun with a predominantly electrothermal driving force. The structure is designed to conduct armature current within a thin annular band around the shank of the large L/D dumbbell-shaped projectile. Current is initiated by a fuse located around the shank, and an impedance of 8 m Omega is achieved, compared to the 1-2 m Omega observed for electromagnetic (EM) guns. A supersonic nozzle in the projectile tail section expands and cools the armature plasma to raise its resistivity, prevent secondary arcs, and provide additional accelerating thrust. Experimental data are presented for 9.5 mm diameter, 5 gm projectiles, accelerated to nearly 600 m/s at 55 kA in a 0.9 m railgun. The armature remains confined in the projectile structure, and 75% of the acceleration is provided electrothermally. The calculated armature temperature is 3.0-3.5 eV, and significant rail burning is observed, consistent with the 5*108 A/m current density of the contained armature. It is concluded from a current density argument that the EMET projectile is best suited to small-bore gun applications
The EMET railgun projectile
Das EMET-Railgun-Projektil mit elektrothermischem Antrieb
1991
6 Seiten, 7 Quellen
Aufsatz (Zeitschrift)
Englisch
In-bore railgun projectile velocity
Tema Archiv | 1986
|EMET technology for rail launchers
Tema Archiv | 1986
|Improvement of railgun projectile using higher specific weight material
Tema Archiv | 1995
|Railgun suborbital projectile - real-time unsteady-loads computation : [final report]
GWLB - Gottfried Wilhelm Leibniz Bibliothek | 2005
|