The changes in the humidity as well as temperature difference between the disc brake and surrounding air were identified as the main factors affecting the corrosion built-up. It was important to study the effect of corrosion on braking frictional characteristics. To do so, the corrosion process was first carried out on two different disc brakes labelled as type A and type B where both disc brakes were made from gray cast iron but by different manufacturers. The corrosion effect on the discs was investigated using two different friction material P-1 and P-2. Friction material P-1 was used for the first disc, while friction material P-2 for the second disc. Corrosion process of the disc was carried out in exposed air condition with burnished disc to simulate disc corrosion for a parked vehicle. Both corroded discs were then run and tested with the two different brands of friction materials P-1 and P-2. The change in brake friction coefficients was analysed using a single-ended brake dynamometer. The results showed that the friction materials have their own characteristics that affect the formation of the oxide layer on the disc and consequently, the performance of the frictional force of disc brake system. Friction force was also closely dependent on the removal of the oxide layer, and by the friction film on the burnished disc surface when applying the brake.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Frictional Characteristics under Corroded Brake Discs


    Beteiligte:
    Hamid, M.K.Abdul (Autor:in) / Kaulan, A.M. (Autor:in) / Syahrullail, S. (Autor:in) / Bakar, A.R. Abu (Autor:in)


    Erscheinungsdatum :

    2013


    Format / Umfang :

    6 Seiten, 6 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    WHEEL BRAKE DISCS

    NISSNER MATTIAS / ZAJFERT PETER | Europäisches Patentamt | 2016

    Freier Zugriff

    Airplane brakes with carbon frictional discs

    Kramarenko, E.I. / Kulakov, V.V. / Kenigfest, A.M. et al. | Tema Archiv | 2006


    METHOD FOR PRODUCING BRAKE DISCS

    TAKAGI YASUHIRO | Europäisches Patentamt | 2017

    Freier Zugriff

    RAILWAY WHEEL WITH BRAKE DISCS

    NOGAMI HIROSHI / FUJIMOTO TAKAHIRO / SAKAYAMA YUIKO et al. | Europäisches Patentamt | 2019

    Freier Zugriff

    Heavy-duty brake discs for high speed trains (1st report; forged brake discs with fins)

    Sakamoto, H. / Nakata, M. / Yamamura, Y. et al. | Tema Archiv | 1993