The paper shows an investigation of the accuracy and reliability of industrially available payload estimation methods in construction machinery, specifically hydraulic excavators. "Payload" refers to the weight exerted at the operating end (bucket) of the working arm of an excavator due to the amount of material in the bucket. There are several challenges which make dynamic and accurate payload estimation a difficult task - the complex kinematics of the excavator, the complicated operations and movements of the arm, as well as the requirements on the robustness of the excavator operation etc. Current payload estimation systems are based on patent EP0736752A1 'Wägeverfahren und Hubfahrzeug zur Durchführung des Verfahrens" from 1995. This empirical method has three main inputs to the system, consisting of boom angle, arm angle and the pressure difference across the boom. Using these inputs, a characteristic matrix is generated by calibrating the system using several different position and load configurations. The dynamic effects such as mass inertia or centrifugal forces are partially or completely ignored in this method. It is therefore very sensitive to changes in measuring speed, accelerations during the measurement or changes in the relative center of gravity position of the payload. This paper is an investigation and evaluation of the functionality and performance of current payload estimation systems using a multi-body-simulation model of an excavator. Using this model-based approach, this investigation can be simplified by eliminating additional influences such as hydraulic or mechanic friction or other effects of the hydraulic power train. This makes it possible to evaluate specifically the influence of static and dynamic behavior of the machine on the described method. Finally, based on the simulation results, possible improvements to the method are considered.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Payload Estimation in Excavators. Model-Based Evaluation of Current Payload Estimation Systems


    Beteiligte:


    Erscheinungsdatum :

    2014


    Format / Umfang :

    14 Seiten, Bilder, 9 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A method for dynamic payload estimation in hydraulic excavators

    Walawalkar, Ashwin | TIBKAT | 2022

    Freier Zugriff

    Payload Estimation in Excavators Using a Machine Learning Based Parameter Identification Method

    Walawalkar, Ashwin / Heep, Steffen / Frank, Martin et al. | Springer Verlag | 2020


    Payload Estimation in Excavators Using a Machine Learning Based Parameter Identification Method

    Walawalkar, Ashwin / Heep, Steffen / Frank, Martin et al. | TIBKAT | 2020


    PAYLOAD ESTIMATION SYSTEM AND METHOD

    MCAREE ROSS / WAUGE DAVID HERMAN | Europäisches Patentamt | 2017

    Freier Zugriff

    Payload estimation using electric power steering signals

    VARUNJIKAR TEJAS M / CHAMPAGNE ANTHONY J | Europäisches Patentamt | 2020

    Freier Zugriff