Tripod bucket foundations are being used as alternative foundations to resist large horizontal and moment loadings from offshore wind turbines. The bearing capacity of the tripod bucket foundation differs particularly from that of the single bucket foundation due to the interaction among individual buckets of the tripod. This paper investigated the group effect of tripod bucket foundations in clay by three-dimensional finite element analysis. Parametric studies were performed varying the spacing between each bucket foundation, embedded depth of the bucket foundation, and loading directions. Normally consolidated clay under an undrained condition was modeled using a linear elastic-perfectly plastic model obeying the Tresca failure criterion. The undrained shear strength and Young's modulus of clay were assumed to linearly increase with depth. The group efficiency factor, which is the ratio of the bearing capacity of the tripod bucket foundation to that of the single bucket foundation, was evaluated based on finite element analysis for vertical, horizontal and moment loadings. Results showed that the efficiency factors were functions of the bucket spacing and embedment depth of the foundations.
Group effect on bearing capacities of tripod bucket foundations in undrained clay
Ocean Engineering ; 79 ; 1-9
2014
9 Seiten, 34 Quellen
Aufsatz (Zeitschrift)
Englisch
Taylor & Francis Verlag | 2020
|The influence of the soil plug on the bearing capacity of bucket foundations in clay
Taylor & Francis Verlag | 2023
|Undrained strength of compacted clay
Elsevier | 1972