To investigate the stability and mechanical characteristics of a type of heavy haul coupler with restoring bumpstop, the geometry and force states of couplers were analysed at different yaw angles and the longitudinal forces. The structural characteristics of this coupler were summarised. To aid in the investigation, a multi-body dynamics model with four heavy haul locomotives and three detailed couplers was established to simulate the process of emergency braking. In addition, the coupler yaw instability and lateral forces were tested in order to investigate the effect of relevant parameters on the locomotive's wheelset lateral forces. The results show that only when the bumpstop force exceeds half of the coupler longitudinal compression force, can the follower be rotated and the yaw angle of the coupler increase. The bumpstop preload is the most important stabilising factor. The coupler lateral force is constant when the coupler longitudinal force is smaller than the critical values of 2000, 1400 and 1150 kN at coupler free angles of 7°, 8° and 9°, respectively, for operation on straight track. The coupler free angle and the locomotive's lateral clearance of the secondary stopper are important in decreasing the wheelset lateral forces of the locomotive. It is advised that a smaller locomotive's secondary lateral suspension stiffness, a free clearance of 35 mm and an elastic clearance of 15 mm from the secondary lateral stopper be selected. If the coupler's free angle is less than the self-stabilising angle which is 5.5° for operation on straight track, the coupler is stable no matter how great the longitudinal force is. The wheelset lateral forces are allowed at the coupler longitudinal force of 2500 kN when the free angle is 6°. These studies establish meaningful improvements for the stability of couplers and match the heavy haul locomotive with its suspension parameters.
The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop
Vehicle System Dynamics ; 52 , 1 ; 26-44
2014
19 Seiten, 21 Bilder, 5 Tabellen, 16 Quellen
Aufsatz (Zeitschrift)
Englisch
The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop
Taylor & Francis Verlag | 2014
|The stability and mechanical characteristics of heavy haul couplers with restoring bumpstops
Kraftfahrwesen | 2014
|The stability and mechanical characteristics of heavy haul couplers with restoring bumpstop
Online Contents | 2014
|Improvements for the stability of heavy-haul couplers with arc surface contact
Taylor & Francis Verlag | 2018
|The Curving Behaviour of Heavy-Haul Locomotive Couplers
Trans Tech Publications | 2012
|