Work presented in this paper has been devoted to understanding the airflow and the subsequent heat transfer properties from a CV anti-coning brake disc during a stationary parking application. CFD analysis was conducted and validated against measured temperatures as air speeds are too low to measure accurately. It was shown that the modelling process of stationary applications is far more complex than for dynamic applications. Computational times are extensive due to the quantity of elements needed to deliver accurate results without a forced flow. The SST turbulence model was also shown to be the most suitable for matching CFD predictions to measured data, although laminar predictions were reasonable too. Exiting airflow at the ID from the lower vanes has been shown to obstruct the external airflow and prevent it from entering the ID for the upper disc section. A low air volume within the channels reduces the flow energy, resulting in recirculation regions forming towards the OD of the middle vanes, which also blocks air entry to the channels. Consequently, the heat transfer from the upper vanes is significantly reduced. Distribution of the heat transfer coefficient from the surfaces has been shown to be relatively evenly distributed across the friction surfaces, with hconv remaining close to 11W/m2K. Upper hconv channel values reached only 3 W/m2K, with vanes housing dual recirculation regions providing negligible convective cooling. Future work will contain the presence of the wheel and caliper parts, including the pads, as the influence of conduction and radiation modes increases.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Heat transfer from commercial vehicle brake disc assemblies in parked conditions


    Beteiligte:
    Stevens, K. (Autor:in) / Tirovic, M. (Autor:in) / Roberts, P. (Autor:in) / Taylor, M. (Autor:in) / Gibbens, P. (Autor:in)


    Erscheinungsdatum :

    2012


    Format / Umfang :

    19 Seiten, 10 Bilder, 9 Quellen


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Datenträger


    Sprache :

    Englisch




    Heat transfer from commercial vehicle brake disc assemblies in parked conditions

    Stevens,K. / Tirovic,M. / Roberts,P. et al. | Kraftfahrwesen | 2012


    BRAKE CONTROL METHOD OF PARKED VEHICLE

    KIM IN SU / JEON JAE HWAN | Europäisches Patentamt | 2016

    Freier Zugriff

    Brake control method of parked vehicle

    Europäisches Patentamt | 2020

    Freier Zugriff

    DISC BRAKE FOR A COMMERCIAL VEHICLE

    TOTH JANOS / THEIL ROBERT / MLINARCSEK CSABA et al. | Europäisches Patentamt | 2018

    Freier Zugriff

    Disc brake for a commercial vehicle

    STOEGER CHRISTIAN / HUBER STEFAN / MENZ CHRISTIAN et al. | Europäisches Patentamt | 2019

    Freier Zugriff