Wind tunnel tests were conducted on a 1.3 m chord NACA 63–418 blade section fitted with an adaptive trailing edge flap. The 20% chord flap had an aramid honeycomb core covered with a silicone skin and was actuated using servo motors. The honeycomb core had a high stiffness in the thickness direction but was compliant in chordwise bending. These anisotropic properties offer a potential solution for the conflicting design requirements found in morphing trailing edge structures. Static and dynamic tests were performed up to a Reynolds number of 5.4 × 106. The tests showed that deflecting the flap from  − 10° to  + 10° changes the blade section lift coefficient by 1.0 in non-stalled conditions. Dynamic tests showed the flap to be capable of operating up to 9° s−1 using a 15 V power supply. A two-dimensional static aeroelastic model of the morphing flap was developed to analyse strains, predict actuator requirements and study fluid–structure interaction effects. The model was used to conduct parametric studies to further improve the flap design. Potential applications include wind turbine blade load alleviation and increased wind energy capture.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design and testing of a deformable wind turbine blade control surface


    Beteiligte:
    Daynes, S. (Autor:in) / Weaver, P.M. (Autor:in)

    Erschienen in:

    Smart Materials and Structures ; 21 , 10 ; 105019/1-105019/10


    Erscheinungsdatum :

    2012


    Format / Umfang :

    10 Seiten, 35 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Compact Wind Turbine Blade Design and Testing

    Miller, Curtis / Chowdhury, Saakib / suresh Babu, Arun vishnu | AIAA | 2025


    Wind turbine blade

    ATUTXA BRIONES MIKEL / JATO LOSFABLOS PEDRO / LANA GALDEANO JORGE et al. | Europäisches Patentamt | 2024

    Freier Zugriff

    WIND TURBINE BLADE

    BETRAN PALOMAS JAUME / RODRÍGUEZ TSOUROUKDISSIAN ARTURO | Europäisches Patentamt | 2016

    Freier Zugriff

    Wind Tunnel Testing of Turbine Blade Tip Flows

    Lavagnoli, Sergio / De Maesschalck, Cis G. / Andreoli, Valeria et al. | AIAA | 2016


    Wind turbine blade, a wind turbine and a method for manufacturing a wind turbine blade

    HURUP ALLAN / NAUHEIMER MICHAEL / NIELSEN MOGENS et al. | Europäisches Patentamt | 2025

    Freier Zugriff