The influence of formulation components on the physical, mechanical and optical properties of hot melt thermoplastic road markings was studied. To minimize the number of experiments, mixture method was used as an effective tool for experimental design. Binder (rosin ester and hydrocarbon based resins), pigment (TiO2), filler (talc) and plasticizer (long oil alkyd resin and dibutyl phthalate) were taken into consideration as the key factors at different levels. A range of formulations were prepared by melt blending of variables and other required components. Softening point temperature (Tsp) and its changes (ΔTsp), Taber abrasion resistance, color difference (ΔE) before and after exposure to the accelerated weathering conditions and heat stability test, were chosen as the key responses. A window of optimum end-use properties of thermoplastic road marking formulations was narrowed down within the range of desired responses in quadratic model using DX v.7.1.3 program. The results showed that the optimized formulations were very close to those from the regression analysis, and the mixture experimental design was an effectual method to optimize the composition of a thermoplastic road marking formulation with respect to its properties. The precision of the model was evaluated by preparing two samples in the optimized window and comparing the predicted and actual properties. The results showed a good agreement between the proposed model and experimental measurements.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Application of mixture experimental design to optimize formulation and performance of thermoplastic road markings


    Beteiligte:
    Mirabedini, S.M. (Autor:in) / Jamali, S.S. (Autor:in) / Haghayegh, M. (Autor:in) / Sharifi, M. (Autor:in) / Mirabedini, A.S. (Autor:in) / Hashemi-Nasab, R. (Autor:in)


    Erscheinungsdatum :

    2012


    Format / Umfang :

    11 Seiten




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    High performance road markings

    Phillips, K. | British Library Online Contents | 1994


    Thermoplastic Inlay Pavement Markings

    Johnson, Eddie N. / Izevbekhai, Bernard I. / Olson, Roger C. | Transportation Research Record | 2009



    Performance Evaluation of No Track Thermoplastic Traffic Markings

    Liu, P. / Lu, J.J. / Wang, Q. et al. | British Library Online Contents | 2010


    Self-driving system for smart road markings and smart road markings

    LEE SUK KI / KIM YONG SEOK / PARK WON IL et al. | Europäisches Patentamt | 2022

    Freier Zugriff