A large contribution to the aerodynamic drag of a vehicle arises from the failure to fully recover pressure in the wake region, especially on squareback configurations. A degree of base pressure recovery can be achieved through careful shape optimisation, but the freedom of an automotive aerodynamicist to implement significant shape changes is limited by a variety of additional factors such styling, ergonomics and loading capacity. Active flow control technologies present the potential to create flow field modifications without the need for external shape changes and have received much attention in previous years within the aeronautical industry and, more recently, within the automotive industry. In this work the influence of steady blowing applied at a variety of angles on the roof trailing edge of a simplified 1/4 scale squareback style vehicle has been investigated. Hot-wire anemometry, force balance measurements, surface pressure measurements and PIV have been used to investigate the effects of the steady blowing on the vehicle wake structures and the resulting body forces. The energy consumption of the steady jet is calculated and is used to deduce an aerodynamic drag power change. Results show that overall gains can be achieved; however, the large mass flow rate required restricts the applicability of the technique to road vehicles. Means by which the mass flow rate requirements of the jet may be reduced are discussed and suggestions for further work put forward.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Aerodynamic drag reduction of a simplified squareback vehicle using steady blowing


    Beteiligte:
    Littlewood, R.P. (Autor:in) / Passmore, M.A. (Autor:in)

    Erschienen in:

    Experiments in Fluids ; 53 , 2 ; 519-529


    Erscheinungsdatum :

    2012


    Format / Umfang :

    11 Seiten




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Road Vehicle Drag Reduction by Combined Steady Blowing and Suction

    Wassen, E. / Thiele, F. / American Institute of Aeronautics and Asronautics | British Library Conference Proceedings | 2009



    Drag Reduction for a Generic Car Model Using Steady Blowing

    Wassen, E. / Thiele, F. / American Institute of Aeronautics and Astronautics | British Library Conference Proceedings | 2008


    Drag Reduction for a Generic Car Model Using Steady Blowing

    Wassen, Erik / Thiele, Frank | AIAA | 2008


    Aerodynamic Jet Vectoring Using Steady Blowing and Suction

    Bettridge, M. W. / Spall, R. E. / Smith, B. L. et al. | British Library Conference Proceedings | 2004