In order to understand the brake judder of a passenger car, the brake judder test of a passenger car was performed with initial speeds of 90, 120, and 150 km/h, end speed of 20 km/h, and pedal forces of 25, 30, 35, and 40 N on a roller dynamometer in a semi-anechoic chamber. The pressure fluctuation of the brake fluid pipe was presented. The accelerations of the steering wheel were recorded at vertical, lateral, and radial directions respectively, and the frequency analysis of the brake judder was also performed. The frequency response functions of the steering system were measured in order to understand the cause of the brake judder. Meanwhile, the multibody system dynamics model of the test vehicle was created with a flexible body and steering system. The brake torque calculated with the brake fluid pressure of the brake pipe in the brake judder test was exerted on the brake systems. The simulated accelerations of the steering wheel were calculated at three different directions, and the frequency analysis of the brake judder was also presented. The design of experiment was presented in order to reduce the brake judder and improve the comfort of the vehicle. An orthogonal array table was designed with 13 factors and 3 levels. The optimum combination was confirmed. The brake judder was also simulated, and the accelerations of the steering wheel were also calculated. Furthermore, the optimization results were verified by the brake judder test. The verification of the optimization indicates that the optimization results are correct and effective.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Brake judder analysis using a car rigid-flexible coupling model


    Weitere Titelangaben:

    Bremsrubbel-Analyse mit Hilfe eines gekoppelten steif-flexiblen Fahrzeugmodells


    Beteiligte:
    Chen, S.M. (Autor:in) / Wang, D.F. (Autor:in) / Zan, J.M. (Autor:in)


    Erscheinungsdatum :

    2012


    Format / Umfang :

    14 Seiten, 30 Bilder, 4 Tabellen, 16 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Brake judder analysis using a car rigid-flexible coupling model

    Chen,S.M. / Wang,D.F. / Zan,J.M. et al. | Kraftfahrwesen | 2012



    Brake judder analysis using a car rigid–flexible coupling model

    Chen, S M / Wang, D F / Zan, J M | SAGE Publications | 2012


    Brake Judder Analysis Based on the Rigid-Flexible Coupling Model of Brake Corner

    Meng, Dejian / Zhang, Lijun / Li, Mingzhuo | SAE Technical Papers | 2016


    Brake Judder Analysis Based on the Rigid-Flexible Coupling Model of Brake Corner

    Li, Mingzhuo / Meng, Dejian / Zhang, Lijun | British Library Conference Proceedings | 2016