A new and promising approach to the reduction of greenhouse gas emissions is the use of improved lightweight constructions based on multi-material systems comprising sheet metal with local carbon fibre reinforced plastic (CFRP) reinforcements. The CFRP is used to reinforce highly stressed areas and can be aligned to specific load cases. The locally restricted application of CFRP means that the material costs can be effectively reduced by comparison to parts made entirely of CFRP on account of the expensive production process requiring the use of an autoclave. These parts are thus only used in high-priced products. The production of hybrid CFRP steel structures in a mass production process calls for an efficient production technology. Current research work within the scope of a collaborative research project running at the University of Paderborn is concentrating on the development of manufacturing processes for the efficient production of automotive structural components made up of sheet metal blanks with local CFRP patches. The project is focusing especially on basic research into the production of industrial components. The aim of the investigation is to create an efficient and controlled process for producing CFRP reinforced steel structures from semi-finished hybrid steel-CFRP material. This includes tool concepts and an appropriate process design to permit short process times. The basis of an efficient process design is an in-depth knowledge of the material behaviour, and hence a thorough characterisation was performed. Material parameters were determined for both simulation and forming. For this, monotonic tensile, shear and bending tests were conducted using both uncured prepregs and cured CFRP specimens. To achieve an accurate simulation of the forming process, a special material model for carbon fibre prepregs has been developed which also includes the anisotropic material behaviour resulting from fibre orientation, the viscoelastic behaviour caused by the matrix and the hardening effects that prevail during curing. Recent results show good qualitative agreement and will be presented in this paper. In order to control the properties of the hybrid components, four different tool concepts for the prepreg press technology have been developed and tested. The concepts are presented and the results of experimental investigations are discussed in this paper.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements


    Beteiligte:


    Erscheinungsdatum :

    2012


    Format / Umfang :

    6 Seiten




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    CFRP Riveting system for joining CFRP reinforcements for automobiles

    PARK DONG WOOK | Europäisches Patentamt | 2024

    Freier Zugriff

    Lightweight floor structure with reinforcements of CFRP and GFRP

    Eckstein,L. / Ichert,L. / Goede,M. et al. | Kraftfahrwesen | 2011


    Analysis of multi-operation, automotive sheet metal forming processes

    Kawka, M. / Makinouchi, A. / Sunaga, H. et al. | Tema Archiv | 1993


    Advances in sheet metal forming processes

    Siegert, K. | Tema Archiv | 1997


    Advances in sheet metal forming processes

    Siegert,K. / Univ.Stuttgart,DE | Kraftfahrwesen | 1997