In this study, the crush behaviour of thin-walled straight and conical shell structures was systematically determined for various absorber designs and investigated comparatively under axial impact loading. The main parameters in the design of these structures are cross-section geometry, wall thickness and semi-apical angle. Several cross sections have been studied: circular, square and hexagonal. In the finite element simulations, these designs were fixed at one end and impacted by a rigid wall from the other with specified mass and velocity giving the required impact energy according to the European regulation ECE R29 by using explicit finite element code LS-Dyna. After crash simulations, energy absorption characteristics and crush forces were obtained for each crush element having different cross sections, wall thicknesses and semi-apical angles. Peak crush force, mean crush force, crush force efficiency and specific energy absorption (SEA) were calculated for a deformation length of 100 mm. In all cases it was found that tubes were crushed progressively. The results of the simulations showed that the square cross-sectioned energy absorber has the lowest crush force efficiency among three cross-section geometries. The crush force efficiency was found to be the highest for the circular absorber which has a semi-apical angle of 12.5 and a wall thickness of 2 mm. Finally, the peak crush forces were lowered by creating blanks and corrugations.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading


    Beteiligte:
    Guler, Mehmet A. (Autor:in) / Cerit, Muhammed E. (Autor:in) / Bayram, Bertan (Autor:in) / Gerceker, Bora (Autor:in) / Karakaya, Emrah (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2010


    Format / Umfang :

    14 Seiten, 17 Bilder, 6 Tabellen, 36 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading

    Guler, Mehmet A. / Cerit, Muhammed E. / Bayram, Bertan et al. | Taylor & Francis Verlag | 2010




    Energy absorption investigation of octagonal multi-layered origami thin-walled tubes under quasi-static axial loading

    Aghamirzaie, Mojtaba / Najibi, Amir / Ghasemi-Ghalebahman, Ahmad | Taylor & Francis Verlag | 2023


    Impact characteristics and crashworthiness of multi-cell, square, thin-walled, structures under axial loads

    Xie, Suchao / Yang, Weilin / Li, Haihong et al. | Taylor & Francis Verlag | 2017